1 / 56

SPACE LATTICES

MATERIALS SCIENCE & ENGINEERING . Part of . A Learner’s Guide. AN INTRODUCTORY E-BOOK. Anandh Subramaniam & Kantesh Balani Materials Science and Engineering (MSE) Indian Institute of Technology, Kanpur- 208016 Email: anandh@iitk.ac.in, URL: home.iitk.ac.in/~anandh.

quito
Télécharger la présentation

SPACE LATTICES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MATERIALS SCIENCE & ENGINEERING Part of A Learner’s Guide AN INTRODUCTORY E-BOOK Anandh Subramaniam & Kantesh Balani Materials Science and Engineering (MSE) Indian Institute of Technology, Kanpur- 208016 Email:anandh@iitk.ac.in, URL:home.iitk.ac.in/~anandh http://home.iitk.ac.in/~anandh/E-book.htm SPACE LATTICES

  2. Space Lattice A lattice is also called a Space Lattice An array of points such that every point has identical surroundings • In Euclidean space  infinite array • We can have 1D, 2D or 3D arrays (lattices) or Translationally periodic arrangement of points in space is called a lattice Note: points are drawn with finite size for clarity  in reality they are 0D (zero dimensional)

  3. 1D Lattices

  4. 1D Lattices Construction of a 1D lattice • Let us construct a 1D lattice starting with two points These points are shown as ‘finite’ circles for better ‘visibility’! The point on the right has one to the left and hence by the requirement of identical surrounding the one of the left should have one more to the left By a similar argument there should be one more to the left and one to the right This would lead to an infinite number of points   The infinity on the sides would often be left out from schematics In 1D spherical space a lattice can be finite!

  5. 1D Lattices Starting with a point the lattice translation vector (basis vector) can generate the lattice • In 1D there is only one kind of lattice. • This lattice can be described by a single lattice parameter (a). • In 1D Mirror  2-fold  Inversion. (The mirror reduces to a point). (Shown below for a two line segment object). • To obtain a 1D crystal this lattice has to be decorated with a motif. • The unit cell for this lattice is a line segment of length a.   Click here to see how symmetry operators generate the 1D lattice Note: Basis vector should not be confused with the basis ( the motif)

  6. How can make some 1-D crystals out of the lattice we have constructed Click here

  7. 2D Lattices

  8. 2D Lattices • 2D lattices can be generated with two basis vectors • They are infinite in two dimensions • There are five distinct 2D lattices: 1Square2 Rectangle3 Centered Rectangle4 120 Rhombus5 Parallelogram (general) To simplify matters: In this set of slides we will NOT consider symmetries with translation built into them (e.g. glide reflection)

  9. 2D Lattices b  a Two distances: a,b There are three lattice parameters which describe this lattice One angle:  Two basis vectors generate the lattice = 90 in the current example

  10. Four (4) Unit Cell shapes in 2D can be used for 5 lattices as follows:Square(a = b,  = 90) Rectangle(a, b,  = 90)  120 Rhombus (a = b,  = 120)  Parallelogram (general)  (a, b, ) • It is clear some of them require more parameters to describe than others • Some of them have special constraints on the angle • Can we put them in some order? • The next slide defines a parameter called ‘terseness’ to order them.

  11. Progressive relaxation of the constraints on the lattice parameters amongst the FIVE 2D lattice shapes • p’ = number of independent parameters = (p  e) (discounting the number of =) • c = number of constraints (positive  “= some number“) • t = terseness = (p  c) (is a measure of the ‘expenditure’ on the parameters Increasing number t Rhombus (p’ = 2, c = 2, t = 1)a = b =120º Square (p’ = 2, c = 2, t = 1)a = b = 90º Note how the Square and the Rhombus are in the same level Rectangle (p’ = 3, c = 1 , t = 2)a  b = 90º E.g. for Square: there are 3 parameters (p) and 1 “=“ amongst them (e)  p’ = (p  e) = (3  1) = 2 Parallelogram(p’ = 3, c = 0 , t = 3)a  b

  12. Now let us consider the 5 lattices one by one

  13. Unit Cell with Symmetry elements (rotational) overlaid 1 Square Lattice Rotational + Mirrors Symmetry 4mm Lattice parameters: a = b,  = 90 Why put rotational symmetry elements onto a lattice? (aren’t lattices built just out of translation?)

  14. A note on the symmetry Rotational + Mirrors Symmetry 4mm This (4mm) is the symmetry of the square lattice • Crystals based on the square lattice can have lower symmetry than the lattice itself • If the crystal based on the square lattice has 4mm or 4 symmetry then the crystal will be called a Square Crystal (else not)

  15. Unit Cell with Symmetry elements (rotational) overlaid 2 Rectangle Lattice Rotational + Mirrors 2mm Lattice parameters: a, b,  = 90 The shortest lattice translation vector (a < b)

  16. Unit Cell with Symmetry elements (rotational) overlaid 3 Centred Rectangle Lattice Lattice parameters: a, b,  = 90 Continued…

  17. Centred Rectangular Lattice Rotational + Mirrors 2mm We have chosen a different unit cell but this does not change the structure!  It still remains a centred rectangular lattice Shape of Unit Cell does not determine the lattice or the crystal!! We will see the utility of the shortest lattice translation vector in the topic on dislocations

  18. Unit Cell with Symmetry elements (rotational) overlaid 4 120 Rhombus Lattice Lattice parameters: a = b,  = 120 Q: I have seen a different representation of the same unit cell WITHOUT the 6-folds. How come? Continued…

  19. 120 Rhombus Lattice Rotational + Mirrors 6mm

  20. The Hexagon shaped cell 1/3 contribution to cell 1/3 6 = 2 1 (full) contribution to cell Often one might see a cell in the form of a hexagon: • This is not a conventional cell (as it is not in the shape of a parallelogram) • This is actually a combination of 3 cells • This cell brings out the hexagonal symmetry of the lattice • It is triply non-primitive (3 lattice points per cell)

  21. Unit Cell with Symmetry elements overlaid 5 Parallelogram Lattice 2 Lattice parameters: a, b,   90 Lattice parameters: a, b,  = 90 There are no mirrors in parallelogram lattice

  22. Summary of 2D lattices Every lattice that you can construct is present somewhere in the list  the issue is where to put them! Shows the equivalence

  23. Why are some of the possible 2D lattices missing? • We had seen that there is a rectangle lattice and a centred rectangle lattice. • The natural question which comes to mind is that why are there nocentred square, centred rhombus and centred parallelogram lattices? • We have already answered the question regarding the centred square lattice.(However, we will repeat the answer here again). • We will also answer the question for the other cases now.

  24. The case of the centred square lattice Centred square lattice = Simple square lattice 4mm Note that the symmetries of are that of the square lattice Based on size the smaller blue cell (with half the area) is preferred This is nothing but a square lattice viewed at 45! Hence this is not a separate case

  25. The case of the centred rhombus lattice Centred rhombus lattice = Simple rectangle lattice Note that the symmetries of the centred rhombus lattice are identical to the rectangle lattice (and not to the rhombus lattice) Based on size the smaller green cell (with half the area) is preferred Hence this is not a separate case

  26. The case of the centred parallelogram lattice Centred parallelogram lattice = Simple parallelogram lattice 2 Note that the symmetries are that of the parallelogram lattice Based on size the smaller green cell (with half the area) is preferred Hence this is not a separate case

  27. How can make some 2-D crystals out of the lattices we have constructed Click here

  28. 3D Lattices

  29. 3D Lattices • 3D lattices can be generated with three basis vectors • They are infinite in three dimensions • 3 basis vectors generate a 3D lattice • The unit cell of a general 3D lattice is described by 6 numbers (in special cases all these numbers need not be independent)  6 lattice parameters 3 distances (a, b, c) 3 angles (, , ) A derivation of the 14 Bravais lattices or the existence of 7 crystal systems will not be shown in this introductory course

  30. There are 14 distinct 3D lattices which come under 7 Crystal Systems The BRAVAIS LATTICES (with shapes of unit cells as): Cube  (a = b = c,  =  =  = 90) Square Prism (Tetragonal)  (a = b  c,  =  =  = 90) Rectangular Prism (Orthorhombic) (a  b  c,  =  =  = 90) 120 Rhombic Prism (Hexagonal) (a = b  c,  =  = 90,  = 120) Parallelepiped (Equilateral, Equiangular)(Trigonal) (a = b = c,  =  =   90) Parallelogram Prism (Monoclinic) (a  b  c,  =  = 90  ) Parallelepiped (general) (Triclinic) (a  b  c,     ) • To restate: the 14 Bravais lattices have 7 different Symmetries(which correspond to the 7 Crystal Systems)

  31. Important Note: do NOT confuse the shape of the unit cell with the crystal systems (as we have already seen we can always choose a different unit cell for a given crystal)

  32. Building a 3D cubic lattice Click here to visualize a step by step construction a = b = c,  =  =  = 90 Each vertex of the cube is a lattice point(no points are shown for clarity) Actually this is a part of the cubic lattice remember lattices are infinite!

  33. A General Lattice in 3D 6 lattice parameters 3 distances (a, b, c) 3 angles (, , ) a  b  c,      In special cases some of these numbers may be equal to each other (e.g. a = b) or equal to a special number (e.g.  = 90) (hence we may not require 6 independent numbers to describe a lattice) Any general parallelepiped is space filling Click here to know more about

  34. Bravais Lattice: various viewpoints • A lattice is a set of points constructed by translating a single point in discrete steps by a set of basis vectors.In three dimensions, there are 14uniqueBravais lattices(distinct from one another in that they have different space groups) in three dimensions. All crystalline materials recognized till now fit in one of these arrangements. • In geometry and crystallography, a Bravais lattice is an infinite set of points generated by a set of discrete translation operations. • A Bravais lattice looks exactly the same no matter from which point in the lattice one views it. • Bravais concluded that there are only 14possible Space Lattices (with Unit Cells to represent them). These belong to 7 Crystal systems. • There are 14 Bravais Lattices which are the Space Group symmetries of lattices An important property of a lattice A derivation of the 14 Bravais lattices or the existence of 7 crystal systems will not be shown in this introductory course

  35. Time to fasten you seat-belts the next few slides will take you on a 10 g-force dive

  36. IMPORTANT Crystals and Crystal Systems are defined based on Symmetry & NOT Based on the Geometry of the Unit Cell Example Cubic Crystal Does NOT imply a = b = c &  =  =  It implies the existence of two 3-fold axis in the structure Intrigued! Want to Know More?

  37. IMPORTANT If lattices are based on just translation (Translational Symmetry (t)) then how come other Symmetries(especially rotational) come into the picture while choosing the Crystal System & Unit Cell for a lattice? Example Why do we say that End Centred Cubic Lattice does not exist? Isn’t it sufficient that a = b = c &  =  =  to call something cubic?(why do we put End Centred Cubic in Simple Tetragonal?) Answer • The issue comes because we want to put 14 Bravais lattices into 7 boxes (the 7 Crystal Systems; the Bravais lattices have 7 distinct symmetries) and further assign Unit Cells to them • The Crystal Systems are defined based on Symmetries(Rotational, Mirror, Inversion etc.  forming the Point Groups) and NOT on the geometry of the Unit Cell • The Choice of Unit Cellis based on Symmetry & Size (& Convention)(in practice the choice of unit cell is left to us!  but what we call the crystal is not!!) Continued…

  38. ONCE MORE:  When we say End Centred Cubic End Centred is a type of Lattice(based on translation) & Cubic is a type of Crystal(based on other symmetries) & Cubic also refers to a shape of Unit Cell(based on lattice parameters) AND:  To confuse things further  Cubic crystals can have lower symmetry than the cubic lattice(e.g. Cubic lattices always have 4-fold axis while Cubic Crystals may not have 4-fold axes) Feeling lost!?!  hang on!  some up-coming examples will make things CRYSTAL clear

  39. To emphasize:  The word Cubic (e.g. in a cubic crystal) refers to 3 things  A type of Lattice(based on translation) & A type of Crystal(based on other symmetries) & A shape of Unit Cell(based on lattice parameters) Hence the confusion!!

  40. Lattices have the highest symmetry (Which is allowed for it) Crystals based on the latticecan have lower symmetry Another IMPORTANT point Click here to know more

  41. We will take up these cases one by one(hence do not worry!) 14 Bravais Lattices divided into 7 Crystal Systems Some guidelines apply ‘Translation’ based concept A Symmetry based concept Why are some of the entries missing? Why is there no C-centred cubic lattice? Why is the F-centred tetagonal lattice missing?  ….? Continued…

  42. Arrangement of lattice points in the Unit Cell & No. of Lattice points / Cell

  43. I P Symmetry of Cubic lattices F Lattice point

  44. I P Symmetry of Tetragonal lattices

  45. One convention I P Note the position of ‘a’ and ‘b’ F Symmetry of Orthorhombic lattices C Is there a alternate possible set of unit cells for OR? Why is Orthorhombic called Ortho-’Rhombic’?

  46. A single unit cell (marked in blue) along with a 3-unit cells forming a hexagonal prism Symmetry of Hexagonal lattices What about the HCP? (Does it not have an additional atom somewhere in the middle?) Note: there is only one type of hexagonal lattice (the primitive one)

  47. Rhombohedral Note the position of the origin and of ‘a’, ‘b’ & ‘c’ Symmetry of Trigonal lattices

  48. Some times an alternate hexagonal cell is used instead of the Trigonal Cell

  49. A trigonal cell can be produced from a cubic cell by pulling along [111] (the body diagonal) (keeping the edge length of the cube constant) Video: Cubic to Trigonal UC

More Related