1 / 8

Safety instructions for upcoming and existing firms

These 8 circumstances are paraphrased as follows:<br>Flammable liquids are stored or dispensed in a building, room, or area.<br><br>Safeguarding devices that signal the apparatus to stop, or barrier guards that use interlocking safeguarding devices<br><br>A rack or stacking structure<br><br>A process that has a risk of ignition or explosion<br><br>A dust collector with an inherent risk of ignition or explosion<br><br>An aluminum or steel factory or a foundry or other molten material handling<br><br>A lifting device, traveling crane, or automobile hoist<br><br>Worker exposure to a designated substance in excess of legislated occupational limits<br><br>

Anassty
Télécharger la présentation

Safety instructions for upcoming and existing firms

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 5 Ways to Prevent Industrial Racking Failures in your Plant

  2. Consequences of Rack Failure • Serious injuries and fatalities • Damage to property and products • Expensive repairs • Disruption to business

  3. Preventable? Rack failures can be avoided in industrial facilities if managers ensure that racks are code compliant, undergo regular inspections and are maintained and repaired on a regular basis.

  4. How? • Ensure that the rack engineered specifications are kept in the premise: Employers should: • Obtain the documentation from the manufacturer that indicates that the rack was designed and installed in accordance with current applicable standards and manufacturer’s specifications, OR • Have a Pre-Start Health and Safety Review (PSR) by consulting engineering firms. Ontario Health and Safety Act & Regulations 851 requires that a PSR needs to be conducted if the required documentation from the manufacturer is not available.

  5. Plan formal reporting procedures and inspections to enforce high standards/maintenance and inspection. An inspection protocol must be developed and carried out by competent workers and should look for: • Excessive deflection in the beams due to overloading • Out of plumb, damaged, or corroded posts • Damaged or missing horizontal and/or diagonal braces • Sheared or missing anchors • Damaged or permanently deflected beams, or incorrect beam engagement

  6. Prioritize damage control • Owners should: • Post load rating signage in visible locations on the racks and train workers to not overload the racks. Be conservative when it comes to loads. • All material handling equipment operators should be trained in accordance with CSA B335. • Material handling practices should be designed to minimize impact loads on the racks.

  7. Take racking seriously Make sure that: • Aisles are properly lit. It can make material placement easier and help reduce rack damage. • Pallets are maintained in a good condition. • Aisles are free of obstruction and hazards.

  8. THANK YOU! “Operating a safe storage facility, is not only a good safety practice, it’s the law. Adhering to the practices indicated is this article may also improve the overall productivity of the facility.”

More Related