1 / 1

Replace Machining Coolant with Advanced Metal Working Fluid

There is the OLD way which uses flood Coolants, these are mineral oils mixed with water. Unist Australia eliminates the OLD way (flood Machining Coolant) and replaces it with a cost effective alternative. For more information, please contact us. Unist Australia Pty Ltd. 7 Bendtree Way, Castle Hill, NSW 2154, Australiau200e, Phone: 02 8850 2022, Mob: 0418 274946, Fax: 02 8850 2033, https://unist.com.au/

Télécharger la présentation

Replace Machining Coolant with Advanced Metal Working Fluid

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fluid Application Solutions for Metal Cutting Head Office: 02 8850 2022 Replace Machining Coolant with Advanced Metal Working Fluid There is the OLD way which uses flood Coolants, these are mineral oils mixed with water. Unist Australia eliminates the OLD way (flood Machining Coolant) and replaces it with a cost effective alternative. We use a metal working fluid, specifically (Unist Coolube®) which we refer to as an “Advanced Metal Working Fluid” or Advanced Metal Working Lubricant which is specially formulated by Unist for use with all minimum quantity lubrication systems (MQL). Our solution not only eliminates the safety hazard created due to coolant spilling over your machine tools and floors areas but also eliminates the well-known disease called dermatitis that operators suffer from handling coolants. Our Way: Cutting/Machining with MQL Use ounces per shift vs. gallons Fluid is consumed in process – no mess! Quality lubricant decreases heat, improves tool life Produces clean, dry chips with no fluid disposal/handling cost Using an advanced metal working fluid, which is applied neat (no dilution) will reduce friction therefore reduce heat. When we apply this lubricant to the cutting area we achieve a significant reduction in tool wear, this is because the oil is 100% oil as opposed to Coolant which is 98% water and 2% oil. Contact us today. Unist Australia 7 Bendtree Way, Castle Hill, NSW 2154, Australia Ph:02 8850 2022| Mob: 0418 274946 Email: johnbarker@unist.com.au Website: https://unist.com.au

More Related