Five Signs Your Timing Belt Tensioner is Faulty

1. Five Signs Your Timing Belt Tensioner is Faulty You should be sure to replace your timing belts and chains along with any tensioners according to the manufacturer's schedule for doing so. In order to schedule your timing belt kit replacement before it becomes too loose or breaks, you can search online for vehicle service near me garages. If the timing belt/chain does snap,in such case, a complete engine replacement is what you'll probably be looking to do. It may be time to change your tensioner if you observe more than one of these:  Check Engine Light - The timing of the valves will be off if the timing belt is loose as a result of a defective tensioner, which would trigger the check engine light. The check engine light will then turn on the dashboard, indicating that there are issues with the engine. Since the check engine light by itself can indicate a myriad of problems, you could use a car diagnostic tool to scan for any fault codes and validate the problem. Have the engine management light issue identified and required repairs made before scheduling your next MOT testing service to avoid a failure. Knocking Sounds - The timing belt will start to knock around and hit the timing cover and other components inside the timing cover when it becomes loose. If the sound does not exactly resemble knocking, it can sound more like slapping. If you start to hear this sound, search online for car services near megarages and book your car in as soon as you can with a competent mechanic fully diagnose and repair the issue.