SlideServe
Menu
Préférences
© SlideServe · v2026

Legislation

JasminFlorian avatar
12 diapositives · 495 Views · Sep 22, 2011

Legislation. Electricity Act 1992 plus amendments. Electricity Regulations 2003. AS/NZS 3000 wiring rules AS/NZS 3760: 2003 Inservice Safety Insp. & test. AS/ NZS 3012:2003 Con. & Demo sites. Electricity Regulations. Reg. 76(B) – AS/NZS 3760:2003

Legislation - slide 1
01 / 12Legislation
1 / 17

Télécharger la présentation

Legislation
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Legislation Electricity Act 1992 plus amendments Electricity Regulations 2003 • AS/NZS 3000 wiring rules • AS/NZS 3760: 2003 Inservice Safety Insp. & test. • AS/ NZS 3012:2003 Con. & Demo sites.

  2. ElectricityRegulations Reg. 76(B) – AS/NZS 3760:2003 Inservice Safety Inspection & testing Electrical Equipment Reg. 69(B)(d) – AS/NZS 3012:2003 Electrical installations – Construction & demolition sites.

  3. Standard AS/NZS 3012:2003 Applies to all construction & demolition sites.

  4. Key points - AS/NZS 3012:2003 • Support of cables entering switchboards –’flexible’. • All final sub-circuits protected by 30mA RCD’s. • Construction wiring must be separate to perm wiring. • Minimum flexible cord size 1.00mm2 • Leads – Protect from mechanical damage. • – Supported off the floor.

  5. Lighting Festoon lamps • Lampholder permanently moulded to cable. • Non-conductive, mechanical guard. • Supported at least 2.5m from the floor.

  6. Lighting - portable Portable lamps Must have a rating of IP2X or higher.

  7. Inspections • Prior to initial service • Where new, supplier to test & tag. • Before return to service after servicing or repair. • Can use an individual tag or register. • Competent person can carry out testing & tagging. • Only a registered person with a current practicing license can carry out electrical repairs. Testing & Tagging

  8. Testing & Tagging Table 2 • 3 Monthly – Portable equipment. • RCD’s – trip test daily before use. (portable gear) – monthly (fixed). • RCD’s testing every: – 3 months portable. – 12 months fixed.

  9. Testing & Tagging Sheds & switchboards. Require Certificate of compliance on completion of installation.

  10. Testing & Tagging - continued • Testing & tagging – visual inspections. • All electrical devices made to AS/NZS 3105 do not comply with AS/NZS 3012:2003.

  11. Testing & Tagging - continued Compliance Plug boxes • Jackson(comply) • PDL(comply) • Others do not currently comply with AS/NZS 2012. (domestic plug boxes)

  12. Thank You