1 / 11

Battery Powered Base Station & Recharge Points for HTs

Battery Powered Base Station & Recharge Points for HTs. Diamond X50A on Fiberglas mast. Power. Fuse & Power Distribution. Yaesu FT8800 Programming, programming, programming....be sure to have the operators manual. Power Distribution Detail. To Yaesu FT8800 Base Station. 15 Amp Fuses.

Olivia
Télécharger la présentation

Battery Powered Base Station & Recharge Points for HTs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Battery Powered Base Station & Recharge Points for HTs Diamond X50A on Fiberglas mast Power Fuse & Power Distribution Yaesu FT8800 Programming, programming, programming....be sure to have the operators manual

  2. Power Distribution Detail To Yaesu FT8800 Base Station 15 Amp Fuses Charging Yaesu HT

  3. Anderson Power Pole Connectors & Splitters

  4. More Power Options

  5. Mobile HT on 'Steroids' Comet Mag Mount Antenna Power Fuse & Power Distribution Mirage BD-35 Dual Band Linear Amplifier....5 Watts in 35 – 45 Watts out But what about the RF connectors ? Yaesu HT

  6. RF Connectors & Personality Connectors Amplifier requires PL-259 Connections PL-259 to PL-259 Connector SMA – SO-239 Pig Tail Adapter Yaesu HT Uses SMA Connectors

  7. HT Connected Directly to Mag Mount PL-259 Connector SO-239 – SMA Adapter You can never have too many personality adapters

More Related