1 / 14

Effectiveness of the 1RM Estimation Method Based on Isometric Squat Using A Back-Dynamometer

Effectiveness of the 1RM Estimation Method Based on Isometric Squat Using A Back-Dynamometer. By Thomas Robertson, Claire Shull, Blake Doane. Background Info .

adina
Télécharger la présentation

Effectiveness of the 1RM Estimation Method Based on Isometric Squat Using A Back-Dynamometer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Effectiveness of the 1RM Estimation Method Based on Isometric Squat Using A Back-Dynamometer By Thomas Robertson, Claire Shull, Blake Doane

  2. Background Info • Until now, the direct measurement technique or the indirect measurement technique has been used to detect personal 1RM. Because the direct measurement technique uses a heavy weight, the risk of injury is high. In particular, when persons without regular training experience lift weights >90% 1RM, their posture becomes unstable. As for the indirect measurement technique, results differ with the tested muscles. For instance, resistance-trained athletes may be able to exceed the number of repetitions usually listed in the table at any given percent of their 1RM, especially in lower- body core exercise. On the other hand, subjects may not be able to perform as many repetitions of exercises involving smaller muscle areas.

  3. Purpose • The study aimed to clarify the relationships between isometric squat and 1RM squat for maximum force and muscle activities and to examine the effectiveness of the 1RM estimation method based on isometric squat. • They hypothesized that although muscular contraction styles differ, IS is an effective index to estimate a 1RM squat.

  4. Variables • Independent Variable: Isometric Squat • Dependent Variable: Estimation of 1RM • Relationship: Measuring the isometric squat will help predict the 1RM

  5. Subjects • 15 men • Mean age of 20 • All had weight training experience • Sport background • Baseball (11) • Soccer (3) • Rugby (1) • Sports training and resistance training 2-4 days a week

  6. Method • The subjects performed a moderate warm-up after measurement of height and weight. After affixing electrodes for a surface electromyographic (EMG) measurement, they performed 1RM squat and IS. The order of both measurements was random.

  7. Method: 1RM • To unify squat posture, the 1RM test was performed with a parallel toe and a parallel squat depth. When increasing weight by 2.5 kg from the load that a subject reported himself, the weight that he could not lift was decided to be 1RM. The 1RM test was performed twice after sufficient rest, and the best data were used for the analysis.

  8. Method: IS • The IS was measured by a back dynamometer. A connection chain and a shaft were installed in a wooden platform. The subjects lifted a shaft on the shoulders. The direction of the toes was parallel. The degree of knee flexion (squat depth) and stance width were prescribed. Knee flexion degree were set at 30, 60, 90 degrees, and parallel. The stance width was either wide (140% width of the shoulders), or narrow (5-cm width). The subject lifted the shaft that was installed to the back dynamometer on his shoulders after taking the measurement posture and performed IS. We regarded the maximum value shown by the back dynamometer as the IS value. The subject performed IS twice with each movement form, and the mean value was adopted. The measurement order of each movement form was random.

  9. Elecromyographic (EMG) • When performing an IS while shouldering a shaft connected to a back dynamometer, the movement may differ from a real squat movement. The researcher examined relationships between the IS using a back dynamometer and the 1RM squat for maximum force and muscle activities. To measure action potential of the agonist during both squats, an EMG measurement examined the following muscles: gastrocnemius, vastus lateralis, rectus femoris, adductor longus, biceps femoris, gluteus maximus, gluteus medius, and erector spinae.

  10. Results • The maximum force of IS in wide stance and parallel depth showed a significant and high correlation with the 1RM squat. Performing IS with the same deep posture of the 1RM squat is important for the estimation of 1RM. Although maximum force is influenced by stance width and squat depth, IS measurement values with wide stance and parallel depth may be useful for the estimation of 1RM squat. • A “good estimation” was found to be within 11.19kg, or about 25 pounds. This was found using a simple linear regression analysis equation.

  11. External Validity • The external validity of this study was strong. Adding more men, women, untrained people, or people from different places would not change the relationship between the independent and dependent variables.

  12. Construct Validity • Independent Variable: Isometric Squat • By controlling the knee flexion and stance width, the researchers eliminate mono-operational bias and confounding constructs and levels bias. • Dependent Variable: Estimation of 1RM squat • Mono-method bias was not present because the IS was measured with the back dynamometer and the EMG measurements of the muscle activity were compared to the EMG measurements of the 1RM squat. • The construct validity for both variable is strong.

  13. Internal Validity • The internal validity is strong because the subjects were not put into groups, but everyone performed the same tests. Therefore, everyone was given an identical treatment.

More Related