1 / 8

Fabrication of a Microchannel Device Using a Digital Projector

Fabrication of a Microchannel Device Using a Digital Projector. By: Adrian Beltran and Shivani Singh Mentors: Matthew Alonso and Joe Muskin 12/07/2010. The Problem. Create a multilayer, microchannel device Why is this important? Current process is expensive

ailani
Télécharger la présentation

Fabrication of a Microchannel Device Using a Digital Projector

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fabrication of a Microchannel Device Using a Digital Projector By: Adrian Beltran and ShivaniSingh Mentors: Matthew Alonso and Joe Muskin 12/07/2010 Beltran and Singh

  2. The Problem Beltran and Singh • Create a multilayer, microchannel device • Why is this important? • Current process is expensive • The process produces a reusable template

  3. Process from Cleanroom 1. Clean wafer 2. Pour polymer 3. Prepare for printing 5. Clean wafer 4. Shine UV light 3 Beltran and Singh

  4. Experimental Setup Beltran and Singh • Materials • Laptop, monomer, projector and spin coater • Process

  5. RPM Study Beltran and Singh • Purpose • Measure the thickness dependence on RPM speed • Tested at 50, 100, 150 and 200 RPM • Measured using a Profilometer

  6. Fabricating the Microchannel Beltran and Singh • Found that it is possible to print the image • Problems arise when you need to clean off excess polymer • Long build times

  7. Conclusions Beltran and Singh • Accomplishments • RPM study and Profilometer measurements • Several failed structures! • Findings • System contrast / resolution is insufficient • Surface tension issue during spin coat

  8. Questions? Matt Shivani Adrian Joe Muskin

More Related