1 / 0

HEAT TRANSFER

HEAT TRANSFER. Definition of heat transfer. Physical process by which thermal energy is exchanged between material bodies or inside the same body as a result of a temperature difference. Heat transfer is the study of the mechanism and rate of this process. DEFINITIONS.

alaina
Télécharger la présentation

HEAT TRANSFER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HEAT TRANSFER

  2. Definition of heat transfer Physical process by which thermal energy is exchanged between material bodies or inside the same body as a result of a temperature difference. Heat transfer is the study of the mechanism and rate of this process.
  3. DEFINITIONS Energy is the ability or capacity to do work on some form of matter. There are several forms of energy, including the following: Potential energyis the energy which a body possesses as a consequence of its position in a gravitational field Kinetic energyis the energy which a body possesses as a consequence of its motion (e.g., wind blowing across a wind generator). It is dependent upon an object's mass and velocity Internal energyis the total energy (potential and kinetic) stored in molecules. Heat (or thermal) energyis kinetic energy due to motion of atoms and molecules. It is energy that is in the process of being transferred from one object to another because of their temperature difference. Radiant energyis the energy that propagates through space or through material media in the form of electromagnetic radiation.
  4. MECHANISMS OF HEAT TRANSFER Conduction- thermal energy is transferred by the direct contact of molecules, not by the movement of the material Convection- thermal energy is transferred by the mass motion of groups of molecules resulting in transport and mixing of properties Radiation- thermal energy is transferred by electromagnetic radiation (waves)
  5. Heat Transfer by conduction Conduction heat transfer: the flow of heat from one part of a body to another, or from one body to another, without appreciable displacement of the particles. This mode of heat transfer is also called molecular heat transfer, because it involves the transfer of kinetic energy from one molecule to the one adjacent to it. Heat can be conducted through solids, liquids and gases. In gases heat transfer by conduction is effected by means of molecular and atomic diffusion.
  6. Cont. Conduction in the bulk of fluids is normally overshadowed by convection but it assumes great importance at fluid boundaries. In metals heat transfer is mainly due to the diffusion of free electrons. The mechanism of conduction is most easily understood by the study of conduction through solids, because in this case convection is not present.
  7. Conduction heat transfer Conduction is the transfer of heat within a substance, molecule by molecule. If you put one end of a metal rod over a fire, that end will absorb the energy from the flame. The molecules at this end of the rod will gain energy and begin to vibrate faster. As they do their temperature increases and they begin to bump into the molecules next to them. The heat is being transferred from the warm end to the cold end.
  8. Fourier’s Law of Conduction Fourier's law is an empirical law based on observation. It states that the rate of heat flow, Q/t, through a homogeneous solid is directly proportional to the area, A, of the section at right angles to the direction of heat flow, and to the temperature difference along the path of heat flow, dT/xi.e where A is the cross-sectional surface area, ΔT is the temperature difference between the ends, Δx is the distance between the ends.
  9. Derivation of Fourier’s heat transfer equation: Consider an area A of a wall of thickness x. Let temperature be uniform over the area A on one face of the wall (T1) and uniform but lower over the same area on the opposite face (T2). Then the heat flow will be at right angles to the plan of A. Fourier’s law states that, the rate of heat flow through a uniform material is proportional to the area A, the temperature drop (Δ T) and inversely proportional to the length of the path of flow (x).
  10. Cont. K= the proportionality constant known as thermal conductivity of conducting medium
  11. Cont. The basic low of heat transfer by conduction can be written in the form of the rate equation: Rate = driving force / resistance Driving force is the temperature drop across the solid Resistance is equal to (x/KA)
  12. Unit of Thermal conductivity Thermal conductivity: K= BTU/ hr . ft. F˚
  13. Cont. Thermal conductivities vary considerably, ranging from metals that have high values, through non-metallic solids and liquids, to gases that have the lowest values. Thermal conductivity values Gases 0.001- 0.1 Liquids 0.01 - 1.0 Solids 1.00 – 100 Air 0.023
  14. Cont. As you can see air does not conduct heat very well. This is the idea behind a styrofoam coolers, the air pockets between the styrofoam beads do not conduct heat very well. On the other hand, metals do conduct heat very well. This is why metal seems cold when you touch it. The metal molecules are conducting your body heat away from your hand quickly.
  15. Thermal conductance and thermal resistance Thermal conductance (K/x) is the amount of heat energy per area of material per degree difference between the outside and inside. Q/t= K A dT/x K/x = Q/t /AdT K/x = Q/t A dT So its units is Btu/ square ft. hr. F˚. In the English system and Watt/ square meters. C˚ Thermal resistance is the reciprocal of thermal conductance (x/K) so its units is square ft. hr. F˚/ Btu, and square meters. C ˚/Watts.
  16. Cont. Thermal resistance is known as the R-value The R-value of a material is its resistance to heat flow and is an indication of its ability to insulate. It is used as a standard way of telling how good a material will insulate. The higher the R-value, the better the insulation.
  17. Heat Transfer through a composite wall Suppose a composite wall made up of three materials with thermal conductivities K1, K2 and K3, thickness of x1, x2 and x3 and temperature of T1,T2, T3 and T4 at the face. Applying Fourier’s equation for each section in turn and as the same quantity of heat Q per unit time must pass through each area A we get: For the first wall: q = K1 A. T1-T2/ x1 T1-T2= q x1/K1A eq. 1
  18. Cont. For the second wall: q = K2 A T2-T3/x2 T2-T3 = qx2/K2A eq.2 For the third wall: q= K3A T3-T4/x3 T3-T4= qx3/K3A eq.3 Since: T1-T4= (T1-T2)+(T2-T3)+(T3-T4) By substitution: T1-T4 = q[ x1/K1A +x2/K2A + x3/K3A]
  19. Cont. So q = T1-T4/Σ x/KA q= ΔT/ Σ x/KA= Total driving force/total resistance
  20. Heat Transfer Through Thin-walled Pipes and Tubes Pipes and tubes are common barriers over which heat exchange takes place. Conduction is complicated in this case by changing area over which heat is transferred. If Fourier’s eq. is to be used, some value of A must be derived from the length of the pipe, N, and the internal and external radii r1 and r2 respectively. When the pipe is thin walled and the ratio r2/r1 is less than 1.5, the heat transfer area can be based on an arithmetic mean of the two radii. A = 2πra N A = 2 π ( r2+r1/2) N, if r2/r1 < 1.5 q = K 2πra N (T1-T2)/r2-r1 r2-r1 is the thickness of the wall and is the pass length across which the heat flows (x).
  21. Heat Transfer Through Thick Walled Pipes and Tubes For thick walled pipes, with a ratio r2/r1 of more than 1.5, the previous derivation of Fourier’s eq. will be found inaccurate. This is because the arithmetic mean radius will not lead to calculation of the actual surface area. A logarithmic mean radius, rm is, in such a case, necessary, which is: rm = r2-r1 / 2.303 log r2/r1 Fourier’s eq. becomes: q= K 2πrm N (T1-T2)/ r2-r1
  22. Heat Transfer by Convection It is the process of heat transfer through the motion of a liquid or gas.. By convection is meant the process of heat transport occurring through the movement of the macroparticles of the liquid or gas in space from a region of one atmosphere to that of another. Convection is possible only in a fluid medium. When the motion of the fluid arises only from the density difference associated with the temperature field is known as natural convection. When the fluid motion arises artificially by an agitator or pump, and is known as forced convection. Heat is transferred simultaneously during the process of convection and conduction
  23. Film Coefficient When heat is being conducted from one fluid to another through a solid barrier e.g. pipe wall both conduction and convection operate. it is sometimes important to consider the conductance of the thin film of fluid which remains stationary next to the barrier. This thin film of fluid is difficult to quantify, its characteristics depending upon complex conditions of turbulence and viscosity, but when dealing with thin high-conductance barriers it can sometimes be quite significant How this thin film of fluid is formed? If a fluid flows in turbulent motion parallel to a solid surface, the velocity increases rapidly from zero at the wall to an almost constant value at a short distance away. The friction between the wall and the flowing fluid reduces its velocity to zero. This leads to the formation of stagnant layer (laminar sub-layer) besides the wall. The major resistance to the flow of heat lies in the laminar sub-layer. Its thickness is therefore, of critical importance in determining the rate of heat transfer from the fluid to the boundary. Increasing flow velocity will decrease the thickness of the layer and the resistance to heat flow. Heat is transferred only by conduction through this layer.
  24. Cont. If on the hot side of the wall, the film layer has a thickness of x1, the eq. of heat transfer to the wall q = K1 A T1-T2/x1 Writing K1/x1 = h1 Where K is the thermal conductivity of the fluid. h is conductance of the thin film since it is equal to K/x and has a unit of …………….. Its reciprocal would denote the thermal resistance of the film. It is also known as film coefficient or heat transfer coefficient of the film. The eq. can be written as: q= h1 A (T1-T2) Heat transfer across the solid barrier will be expressed by:
  25. Cont. q= Kw A (T2-T3)/xw Using the film coefficient h2 to describe the heat transfer from the barrier to the colder fluid: q= h2 A (T3-T4) q= AΔT/ 1/h1 + xw /Kw+ 1/h2 For simplicity: The term U which is called the overall heat transfer coefficient and is equal to 1/ 1/h1 + xw/Kw + 1/h2 So q= U A ΔT
  26. Heat Transfer by Radiation Radiation allows heat to be transferred through wave energy. These waves are called Electromagnetic Waves, because the energy travels in a combination of electric and magnetic waves. This energy is released when these waves are absorbed by an object. For example, energy traveling from the sun to your skin, you can feel your skin getting warmer as energy is absorbed. The energy a wave carries is related to its wavelength (measured from crest to crest). Shorter wavelengths carry more energy than longer wavelengths. Wavelengths are measured in terms of meters: 1 (millimeter) mm = .001 m = 10-3 m 1 (micrometer) μm = .000001 m = 10-6 m 1 μm is 1 millionth of a meter. One-hundredth the diameter of a human hair. 1 (nanometer) nm = .000000001 m = 10-9 m
  27. Cont. * When talking about electromagnetic waves it is sometimes easier to give them characteristics of particles, we call these particles photons. A photon of x-ray radiation carries more energy than a photon of visible light. * All things with a temperature above absolute zero emit radiation. Everything, your body, your desk, your house, grass, snow, the atmosphere, the moon, they all emit a wide range of radiation. The source of this electromagnetic radiation are vibrating electrons that exist in every atom that makes an object.
  28. Emitted radiation can be: Absorbed Increasing the internal energy of the gas molecules. This fraction is called absorptivity (a). Reflected Radiation is not absorbed or emitted from an object but it reaches the object and is sent backward. This fraction is called reflectivity (r) Scattered Scattered light is deflected in all directions, forward, backward, sideways. It is also called diffused light. Transmitted Radiation not absorbed, reflected, or scattered by a gas, the radiation passes through the gas unchanged. This fraction is called transmissivity. Most industrial solids are opaque, so that the transmissivity is zero and a + r = 1 Reflectivity and absorptivity, depend greatly on the nature of the surface. A black body : a body which absorbs all and reflects none of the incident radiation, so it is a perfect radiator.
  29. Cont. The radiation of all bodies depends on temperature. The intensity of radiation increases with rising temperature, because a rise in temperature is accompanied by an increase in the internal energy of the substance. Radiation depends considerably more on temperature than the processes of heat conduction and convection.
  30. Cont. The Stefan-Boltzmann law tells us that as the temperature of an object increases, more radiation is emitted each second. E = σT4where σ is a constant, T is the temperature of an object in Kelvin and E is the maximum rate of radiation emitted per meter2 . In other word, the law states that the rate of energy emission from a black body is proportional to the fourth power of the absolute temperature.
  31. Summary This figure describe what is going on and how each method of heat transfer works in this example:
  32. Steam as Heating medium Like all other substances, water can exist in several states— solid, liquid, or vapor— depending on its temperature and pressure.  Steam is the name for water in its vapor state.  Steam is created by heating liquid water to a point where the intermolecular forces between the molecules are broken, allowing the molecules to move apart.  The temperature at which the first water molecule transforms to vapor is called the boiling point.  As more heat is added to the liquid/vapor mixture, the temperature remains at the boiling point until all of the liquid is transformed to saturated steam
  33. Basic Properties of Steam Heating steam as a heating medium has superior properties not offered by other heat mediums. Among those, the following two are the most notable: 1- Provides even heating 2- Provides rapid heating
  34. How Does Steam Provide Stable, Even Heating? In the case of saturated steam, if the steam pressure is known then the steam temperature may be determined. Pressure changes instantaneously within a space. When saturated steam condenses, it condenses at the saturation temperature, and the saturated water (condensate) formed is of the same temperature as the saturated steam. This means that if the pressure at the heat transfer surface (the jacket or coil interior of the equipment) is held at a constant, continuous heating will be able to take place at the same temperature at every part of the heat transfer surface.
  35. How Does Steam Provide Rapid Heating? The transfer of heat is caused by the process of condensing steam. The latent heat contained in steam is released in the instant the steam condenses into liquid phase. The amount of latent heat released is 2 – 5 times greater than the amount of sensible heat in the hot water (saturated water) after condensation. This latent heat is released instantaneously and is transferred by means of a heat exchanger to the product being heated
  36. Cont. Steam Benefits: Steam is the most commonly used heating medium in thermal maintenance applications because of three key benefits: Significant energy storage.  A significant amount of heat energy is required to transform liquid water to steam.  This energy is stored in the steam.  When saturated steam comes into contact with a cooler object, heat is transferred from the steam, and very large heat transfer rates are produced as the steam condenses into liquid water (often referred to as condensate).  Constant temperature.  The steam/condensate temperature remains at the boiling point until all of the steam is transformed back into liquid water.  So, for a given steam pressure, the heating medium remains at a constant temperature.  This preserves a maximum temperature difference between the heating medium and process, which maximizes the heat transfer rate. Process by-product.  Often, steam is created as a by-product of a heat exchange operation designed to cool a process stream.  This is the case with a waste heat boiler.  Since this steam is already available, it is usually more economical to use it rather than another as a heating medium/technology
  37. Different Types of Steam 1- Saturated steam (wet): Steam directly arising from boiling water, whether under atmospheric or higher pressures, is said to be saturated. When steam is generated in a boiler, the water surface is turbulent and droplets of water are thrown up into the steam. The movement of the steam towards the outlet will carry these droplets away into the steam system. Steam which contains these particles of water in a finely divided state is called wet steam.
  38. N.B. In a boiler, if steam is taken away faster than it is being generated, the surface of water will be below atmospheric pressure. The effect of this will be lowering the boiling point of water, lower the sensible heat and increase the latent heat. Pressure T. of water and steam S. H L.H Total heat Btu/lb Btu/lb Btu/lb (15 in. Hg v) 179 ˚F 147 991 1.138 Atm. P 212 ˚F 180 971 1.151 200 psig 388 ˚F 362 838 1.200
  39. Cont. If one pound of wet steam is made up of 95% dry steam and 5% water particles, it is said to have a dryness fraction of 0.95. The total heat of one pound of wet steam is less than the total heat of dry steam, because the water particles have escaped without receiving any latent heat. The total heat of wet steam will be made up of h (sensible heat), f (dryness fraction) and L (latent heat). For example: the total heat of one pound of steam at 200 p.s.i.g. having a dryness fraction of 0.94 is: H = h + f L H = 362 + 0.94 X 838 H = 1.149 Btu/lb This is 51 Btu/lb less than the total heat of dry steam from the previous table (1200 Btu/lb)
  40. Cont. In other words, the better the quality of steam, the less water it contains, the higher will be the possible rate of production. The simplest method of obtaining dry steam is by the use of steam dryers or steam separators. Steam Dryer: The presence of water in steam pipes should never be permitted. Water being a better conductor of heat than dry steam, will act as a conductor between the steam and the metallic pipe, setting up active condensation and preventing economical working of boiler. The steam dryers separate water particles from flowing steam by two distinct methods, both of which operate by the difference in density of steam and water. The water separator is always fitted near the boiler to separate water carried forward mechanically from the boiler.
  41. Thermal Insulation How insulation works Insulation is a barrier that minimizes the transfer of heat energy from one material to another by reducing the conduction, convection and/or radiation effects. Insulating materials: Most insulation is used to prevent the conduction of heat. In some cases radiation is a factor. A good insulator is obviously a poor conductor. Less dense materials are better insulators. The denser the material, the closer its atoms are together. That means the transfer of energy of one atom to the next is more effective. Thus, gases insulate better than liquids, which in turn insulate better than solids. An interesting fact is that poor conductors of electricity are also poor heat conductors. Wood is a much better insulator than copper. The reason is that metals that conduct electricity allow free electrons to roam through the material. This enhances the transfer of energy from one area to another in the metal. Without this ability, the material--like wood- does not conduct heat well.
  42. Insulation from conduction: Conduction occurs when materials—especially solids—are in direct contact with each other. High kinetic energy atoms and molecules bump into their neighbors, increasing the neighbor's energy. This increase in energy can flow through materials and from one material to another.
  43. Solid to solid To slow down the transfer of heat by conduction from one solid to another, materials that are poor conductors are placed in between the solids. Examples include: Fiberglass is not a good conductor nor is air. That is why bundles of loosely packed fiberglass strands are often used as insulation between the outer and inner walls of a house. Conductive heat cannot travel through a vacuum. That is why a thermos bottle has an evacuated lining. This type of heat cannot be transferred from one layer to the other through the thermos bottle vacuum.
  44. Thermal Insulation: A hot storage vessel or a steam pipe will lose heat to the atmosphere by radiation, conduction and convection. The loss by radiation is a function of the fourth power of the absolute temperatures of the body and surroundings and will be small for low temperature differences but will increase rapidly as the temperature difference increases. Air is a very poor conductor and heat loss by conduction will, therefore, be small. On the other hand, since convection currents form very easily, the heat loss from an unlagged surface is considerable. The conservation of heat and hence usually of steam is an economic necessity and some form of lagging should normally be applied to hot surfaces. The two main requirements of a good lagging material are that it should have a low thermal conductivity (High R- value) and that it should suppress convection currents. The materials that are frequently used are cork, asbestos and glass-wool.
  45. The critical insulation thickness: For a circular pipe with length very large compared to outer diameter, it may be assumed that the heat flows only in radial directions. If a layer of insulation installed around the circular pipe to reduce the amount of heat transfer, then it is assumed that the heat transfer will be decreased by adding more insulation. By adding the insulation around the pipe the outside surface area is increased, which will increase the heat transfer. The determination of critical thickness of an insulation-layer is very important to minimize the heat transfer particularly in circular hot water pipes. For this the heat loss from an insulated pipe is considered as a function of the insulation thickness (t). The critical thickness (rc) is determined analytically in terms of thermal conductivity r critical = K /h(h= heat transfer coefficient including radiation component).
  46. Economic Thickness of Lagging: Increasing the thickness of the lagging will reduce the loss of heat and thus give a saving in the operating costs. The cost of the lagging will increase with thickness and there will be an optimum thickness when further increase does not save sufficient heat to justify the cost.. Generally, the smaller the pipe, the smaller the thickness used e.g. for temperature of 100-150C˚, and for pipes up to 6 in. diameter it is recommended to use one inch thickness of lagging and 2 inch thickness if the pipe is over 9 inch diameter.
  47. HEAT TRANSFER EQUIPMENT They are classified as: Single- pass tubular heater Fixed-head heat exchanger Floating-head heat exchanger
  48. “R-value” as used in classifying performance of insulation in commercial practice is  R= ΔT/(q/A) The units of R-value are m2˚C /W. Note: “R-value” differs from the resistance. In R-value we use heat flow per unit area. Furthermore, “R-value” is always expressed for a certain thickness of the insulating layer. For example: 3.8 cm thickness of extruded polystyrene has an “R-value” of 1.3.
  49. Single pass tubular heater
  50. Fixed head heat exchanger
  51. Floating head heat exchanger
  52. Factors to be considered in the design of heat exchangers: In an exchange, the shell-side and tube-side transfer coefficients are of comparable importance, and both must be large if a satisfactory overall coefficient is to be obtained. The shell-side heat transfer can be improved by the installation of alternating segmental baffles in the shell which will multiplicate the path of the heating liquid or steam by making it flow first in one sense then in the opposite sense across the tube bundle rather than parallel to it (perpendicular to the tubes). These baffles are frequently of the segmental form with about 25 % cut for the free space and are perforated to receive the tubes, thus helping their support. The presence of baffles in the shell serves also to increase the velocity of flow of the shell fluid or gas across the tubes, thus improving further the heat transfer.
  53. The advantages of the baffles can be summarized as follows: They support the long tubes and the tube sheets and prevent their weakening. They lengthen the path of the fluid for maximum heating efficiency. Increasing the velocity of the entering fluid by decreasing the cross-section of the shell, thus decreasing the thickness of the resistant fluid.
  54. The tube-side: heat transfer is increased, in view of Fourier’s law, by increasing K, and A, and decreasing x. Thus, the tubes should be constructed of a metal of high thermal conductivity K, and should be made as long as possible and as thin as practicable. Within certain limits, the higher the number of the tubes in the bundle, the greater will be the total surface area offered for heat transfer. However, it is recommended to space theses tubes so closely that the area of the path outside the tubes is very small.
  55. Different patterns of flow: If the hot and cold fluid flow in one direction parallel to each other, it is referred to as a parallel-flow apparatus as in the following figure (a). If the two fluids flow parallel to one another but in opposite directions, the heat exchanger is known as a counterflow device (b). If the fluids cross each other, the pattern is referred to as cross –flow (c). In addition to these simple flow arrangements, more complex ones are encountered in practice: simultaneous parallel and cross-flow (d), and multiple cross-flow (e).
More Related