1 / 26

DELTA R&D Project at SLAC

DELTA R&D Project at SLAC. Heinz-Dieter Nuhn – LCLS Undulator Group Leader. Presented at Monday, March 5, 2012. Project Motivation. Flexible polarization control Support for large taper ranges required for TW FELs and high SXR output Photon energy change at fixed electron energy.

amaya-mejia
Télécharger la présentation

DELTA R&D Project at SLAC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DELTA R&D Project at SLAC Heinz-Dieter Nuhn – LCLS Undulator Group Leader Presented at Monday, March 5, 2012

  2. Project Motivation • Flexible polarization control • Support for large taper ranges required for TW FELs and high SXR output • Photon energy change at fixed electron energy • SLAC has successfully commissioned the first x-ray FEL based on compact fixed gap planar undulators. • The compactness of the undulators allowed a unique and successful remote controlled alignment strategy. Problem: Important desirable features are missing Standard Solution: Use variable gap / APPLE-II undulators • Variable gap undulators are large and heavy • LCLS alignment strategy is difficult to implement. Proposed Solution: Compact variable phase DELTA undulator • Compact fixed-gap design very similar to LCLS undulators • Provides full K and polarization control. R&D Issues • Standard magnetic measurement techniques won’t work when fully assembled • Tuning to FEL type requirements looks challenging • Installation of vacuum chamber in fully assembled undulator not yet solved DELTA R&D Project at SLAC Page 2

  3. DELTA Undulator Model Developed and Tested at Cornell Two adjustable phase undulators* assembled in one device** 30 cm long model built in Cornell Greek Capital Delta Letter • Compact box-like frame (prototype has dimensions ~150mmx150mm) • Full polarization control • Sqrt(2) stronger field in planar mode and ~2X stronger in helical mode in compare with conventional Apple II type undulators. Project was motivated by the Cornell ERL needs. *R. Carr, Adjustable phase insertion devices as X-ray sources, Nucl. Instr. And Meth. A 306(1991) 391-396 **A. Temnykh, Delta undulator for Cornell energy recovery linac , Phys. Rev. ST Accel. Beams 11, 120702 (2008) DELTA R&D Project at SLAC Page 3

  4. Assembly start Test assembly and dimensions check Model in vacuum vessel Transport from Cornell to BNL Cornell 30-cm Model: Construction Steps • Model parameters • PPM structure • NbFeB (40SH) Br =1.25T, Hci > 20kOe • Undulator Period = 24mm • Device Length ~ 30cm • Bmax (designed) in helical mode ~1.0T • Bmax (designed) in planar ~ 1.4T Magnet field measurement and tuning DELTA R&D Project at SLAC Page 4

  5. Cornell 30-cm Model:: Magnetic Field Tuning “By” tuning with Hall probe Conventional setup. For field analysis used B2E software from ESRF (1) (2) • Hall probe sensor (HGT-2101) mounted on sliding stage • Sliding stage Optical phase errors, RMS ~2.0deg Trajectory By along magnet DELTA R&D Project at SLAC Page 5

  6. Cornell 30-cm Model: Field Properties in Helical Mode Measured field components Trajectory X-ray Spectra Helical mode, left circular polarization (phase between vertical and horizontal pairs 900) Helical mode, right circular polarization (phase between vertical and horizontal pairs -900) DELTA R&D Project at SLAC Page 6

  7. Planar mode, +45deg linear polarization (vertical and horizontal pairs in phase) Planar mode, - 45deg linear polarization (phase between vertical and horizontal pairs 180deg) Cornell 30-cm Model: Field Properties in Planar Mode Trajectory Measured field components X-ray Spectra Note: B1 and B2 two orthogonal field component tilted relative horizontal and vertical axis by 45deg. DELTA R&D Project at SLAC Page 7

  8. Cornell 30-cm Model: Beam Test at the ATF/BNL Model in vacuum vessel Transport from Cornell to BNL Delta undulator installed in BL2 ATF. First harmonics in planar and helical mode 5300nm wavelength radiation as function of the electron beam energy. Signal confirmed 1.28T peak field in undulator 4520nm (bottom) and 3600nm (right) wavelength radiations versus beam energy. Both data confirmed 0.93T field amplitude. A. Temnykh, et al., Delta undulator model: Magnetic field and beam test results. Volume 649, Issue 1, 1 September 2011, Pages 42-45 DELTA R&D Project at SLAC Page 8

  9. DELTA Project Synopsis Conceptual Design is completed CDR: 11/18/2012 Positive Report: 12/12/2012 Funding Approval: 12/13/2012 Gene Kraft the Project Engineer Sasha Temnykh will provide technical support Rough cost estimate: $1.6M Rough schedule estimate: 2 years $1.6M DELTA R&D Project at SLAC Page 9

  10. Proposed Change to LCLS Undulator Line Delta Undulator will occupy space freed by removed LCLS segment. (Later Addition) Phase shifter will be added, later. DELTA R&D Project at SLAC Page 10

  11. Isometric View – Installed on Girder Beam Direction DELTA R&D Project at SLAC Page 11

  12. Project Scope • Build out-of-vacuum version of the Cornell DELTA undulator model at 3.2-m length. • Develop techniques for tuning and measurement of undulators that don’t permit side access. • Develop new vacuum chamber • Replace present undulator U33 and horizontal slide support with DELTA undulator • Incorporate into LCLS EPICS control system (Start with 1.6-m long prototype) Vacuum Chamber PROTOTYPE DELTA R&D Project at SLAC Page 12

  13. Variable Phase Undulator for Polarization Control 4 Movable PM Quadrants Four independent quadrants of permanent magnets move longitudinally at fixed gap. By sliding the arrays it is possible to control the K from full to zero and to control the polarization of the radiation emitted DELTA R&D Project at SLAC Page 13

  14. Scientific Motivation Short Term Benefits: • Provide x-ray radiation with controllable degree of polarization (left or right circular, vertical or horizontally linear) • Provide increased tapering range in horizontally planar mode to increase LCLS FEL radiation output, particularly in HXRSS self seeding mode. Long Term Benefits: • Helical undulator to build shorter LCLS-II TW extension • Build future x-ray FELs with full polarization control, full tunability under LCLS type alignment control. DELTA R&D Project at SLAC Page 14

  15. General 1.5 m Permanent Magnet Assembly Detail Moveable Strongback 6061-T6 Aluminum Z Rectangular Frame 6061-T6 Aluminum Linear Actuator (1/quadrant) TSK Linear Slide (13 pairs/quadrant) PM w/Holder (200 pairs/quadrant) DELTA R&D Project at SLAC Page 15

  16. Deformation of ONE Base and Frame under Magnetic Forces Frame, Helical mode Base, Helical mode Maximum deformation ~0.7mm Maximum deformation ~0.6mm Frame, Planar mode Base, Planar mode Maximum deformation ~4.8mm Maximum deformation ~6mm In “zero” field modes deformations are not critical for the undulator performance DELTA R&D Project at SLAC Page 16

  17. Vacuum Chamber Assembly Previously attached Vacuum Flange 6.35 OD Ceramic Guide Rod Vacuum Chamber Tube Undulator PM Assembly Chamber insertion would require guide rod to push/pull the tubing through the 3.2 m Undulator Assembly DELTA R&D Project at SLAC Page 17

  18. Vacuum Chamber Assembly Second Flange Attached Possibly attached by induction braze Vacuum Chamber Tube w/ Previously Attached Flange Undulator PM Assembly Fixture for proper flange orientation This step to be done in MFD Vacuum Cleanroom. DELTA R&D Project at SLAC Page 18

  19. Cornell prototype undulator was an in-vacuum device. Our internal vacuum chamber made from tubing is a new approach, first time attempted • Vacuum Chamber must be installed after Magnetic Measurements Group assembles and verifies the 4 quadrants as one unit • Chamber must pass through the magnet pole tips, therefore a vacuum flange cannot be installed until after the chamber is inserted • Vacuum chamber must have minimal “sag” to avoid/minimize permanent magnet pole tips rubbing on the OD of the vacuum chamber tubing and to reduce transverse wakefields. • Chamber is effectively a very long thin wall tube susceptible to bending, difficult to clean and transport (weight is under 1 pound) • Attachment of end flange on pass-through end of chamber may cause thermally induced distortion compromising tube straightness Vacuum Chamber Design Challenges DELTA R&D Project at SLAC Page 19

  20. GENESIS 1.3: 830eV, 2kA, 6 planar sections + Delta 3.2 m Delta, helical LCLS planar undulators Circular polarization : 87%. planar power 0.24 GW, circular power 1.7 GW Yuantao Ding DELTA R&D Project at SLAC Page 20

  21. GENESIS 1.3: 830eV, 2kA, 7 planar sections + Delta 3.2 m Delta, helical LCLS planar undulators Circular polarization : 70%. planar power 2.5 GW, circular power 6.0 GW Saturation regime in Delta. Yuantao Ding DELTA R&D Project at SLAC Page 21

  22. Fluctuation of the polarization Gain length is about 1.6 – 2m in the soft x-ray wavelength. E. Allaria The ratio between the circular power and the planar power determines the degree of polarization. Current jitter affects the FEL gain, hence affects the planar and circular FEL power. need further work on the fluctuation issues. DELTA R&D Project at SLAC Page 22

  23. Polarization Simulations Discussions The 3.2-m-long DELTA undulator should provide about ~70% circular polarization with a few GW FEL; Higher power levels can be obtained with lower degree of circular polarization; EnricoAllaria proposed to detune one of the undulator K to optimize the output. We can also consider to use laser heater, or peak current to control FEL power and degree of polarization. Fluctuation estimates need more. Expected are levels of ~5%; Other tricks may be considered, e.g., transverse truncation of the linear polarized component. (As suggested by Geloniet al.) DELTA R&D Project at SLAC Page 23 Yuantao Ding

  24. Helical Undulator Use to Enhance TW FEL Helical: (dashed) Planar: (solid) 8 keV Power (TW) 13 keV Shorten the system or increase power by 50% Extend to 13 keV (LCLS-II highest photon energy) Reach 1 TW within 100 m undulator at 8 keV (after seeding) J. Wu DELTA R&D Project at SLAC Page 24

  25. Summary • The DELTA R&D project includes developing a compact polarization control undulator for LCLS based on the DELTA undulator developed by A. Temnykh at Cornell. • There are two goals • Primary Goal : Develop undulator that produces radiation with controllable degree polarization (circular, linear vertical and horizontal). • Secondary Goal : Test if DELTA undulator tuning and magnetic measurements can be developed to meet FEL type tolerances. To support future FELS and LCLS-II TW extensions. DELTA R&D Project at SLAC Page 25

  26. End of Presentation

More Related