1 / 9

Status work for the RPC lab in Helwan

Status work for the RPC lab in Helwan. Yasser Assran Suez University 23/01/2014. Outlines. Our goal. What we have in Helwan lab. What we have done . What we need to complete the system. Our plan. Our Goal.

august
Télécharger la présentation

Status work for the RPC lab in Helwan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status work for the RPC lab in Helwan Yasser Assran Suez University 23/01/2014

  2. Outlines • Our goal. • What we have in Helwan lab. • What we have done . • What we need to complete the system. • Our plan.

  3. Our Goal • To setup a complete cosmic stand in Helwan University laboratory, which enable us to test the RPC gaps as well as the complete RPC chamber and perform R&d on gas mixture , Bakelite…...

  4. What we have in Helwan lab. • CAEN HV power supply. • 4 scintillators 50x50 square cm with photomultipliers. • Oscilloscope . • NIM crate. • Some NIM modules (OR , coincidence, discriminator, Scalar, fan in-fan out and receiver). • We agreed to use premixed gas. • One complete RPC and two gaps.

  5. What we have done .

  6. What we need to complete the system. • VME crate (rent from electronic pool) • TDC (bought) • PCI card (bought) • Controller (Bari) • PC with the needed software (bought) • NIM-ECL-NIM module (rent from electronic pool) • Dual timer (rent from electronic pool)

  7. Our plan. • Set up the complete system at 904 lab (1st of Feb). • Clone the software and run it on our pc (after add the desired modifications). • Take some data at 904. • Transfer the system to the GIF and test some chambers there (end of Feb). • Finally transfer the working system to Helwanlab (by Summer). Thank you

More Related