1 / 9

What is Utility Islanding Protection? - BCJ Controls | BlueLog | MainsPro

Utility Islanding Protection with the DNSP -Distributed Network Supply Provider or supply authority variety methods such as: Manual disconnection, automated disconnection, impedance isertion, and the SCADA - Supervisory Controls and Data Acquisition. Contact and visit BCJ Controls for more information: http://bcjcontrols.com.au/

australiabcjcontrols
Télécharger la présentation

What is Utility Islanding Protection? - BCJ Controls | BlueLog | MainsPro

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Utility Islanding Protection BCJ Controls

  2. Utility Islanding Protection • The DNSP - Distributed Network Supply Provider/Supply Authority has a variety of methods available to it to force systems offline in the event of a failure. BCJ Controls pty.Ltd - 2,17 Lorraine St, Peakhurst, NSW Australia 2210

  3. Manual disconnection • Through the use of signals sent though the power lines, or on dedicated comms line. Power line carrier communications could be installed in all inverters, checking for signals from the utility and disconnecting either on command, or if the signal disappears. Such a system would be reliable, but expensive. BCJ Controls pty.Ltd - 2,17 Lorraine St, Peakhurst, NSW Australia 2210

  4. Automated disconnection • Most small generators require a manual disconnect switch, so at a minimum the utility could send a worker to pull them out of service. For large sources, you could simply install a dedicated phone line to have an operator manually shut down the generator. In either case, the manual reaction time is likely to be too long. BCJ Controls pty.Ltd - 2,17 Lorraine St, Peakhurst, NSW Australia 2210

  5. Impedance insertion • To deliberately force a section of the grid into a condition that will guarantee the inverters disconnect. • An example is a large bank of capacitors that are added to a feeder, left charged up and normally disconnected. In the event of a failure, the capacitors are switched into the feeder by the utility. The capacitors can only supply current for a short period, ensuring that the start or end of the pulse they deliver will cause enough of a change to trip the inverters. BCJ Controls pty.Ltd - 2,17 Lorraine St, Peakhurst, NSW Australia 2210

  6. Impedance insertion • There is no NDZ for this method of anti-islanding protection. The main disadvantage is cost, the capacitor bank needs enough capacitance to cause changes in voltage that will be detected, this is a function of the amount of load on the circuit. Large banks would be needed, cost prohibitive on the part of the utility. BCJ Controls pty.Ltd - 2,17 Lorraine St, Peakhurst, NSW Australia 2210

  7. Supervisory control and data acquisition (SCADA) • Anti-islanding protection can be implemented through the use of the Supervisory Control and Data Acquisition (SCADA) systems already used in the utility. An alarm could sound if the SCADA system detects power on a line where a failure is known to be in progress. This does not affect the anti-islanding systems, but could allow any of the systems to be quickly implemented. BCJ Controls pty.Ltd - 2,17 Lorraine St, Peakhurst, NSW Australia 2210

  8. BCJ Controls • At BCJ Controlswe produce Secondary Protection Switchboards with solar protection relays for Commercial Solar over 30kW grid connections. • BCJ Controls- commercial solar network protection unit - switchboard manufacturing including protection relay & anti-islanding and zero export devices. BCJ Controls is a solar technology company set up by ex-utility industrial sparkies. Between them they have a large amount of experience in electrical grid protection, as well as dealing with utilities on a day-to-day basis.

  9. www.bcjcontrols.com.au VISIT US

More Related