1 / 26

Processing Airborne Doppler Radar Data

azize
Télécharger la présentation

Processing Airborne Doppler Radar Data

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Processing Airborne Doppler Radar Data

    3. Raw unedited data

    4. Radial velocity corrected for aircraft speed

    5. Remove bad data in rings

    6. Remove bad data in rings

    7. Removing signals with low Normalized Coherent Power

    8. Data with low coherent power removed

    9. Lone data points deleted despeckling

    10. Most of ground clutter removed

    11. Manually removing bad data

    12. Most bad data manually removed

    13. Data that varies significantly from neighboring data removed defreckling

    14. Final clean edited radar sweep!

    15. Next step? Repeat the process about 240 times for a 10 minute Quad-Doppler leg!

    16. How Quad Doppler wind retrieval from airborne radars works

    17. How Quad Doppler wind retrieval from airborne radars works

    18. How Quad Doppler wind retrieval from airborne radars works

    19. How Quad Doppler wind retrieval from airborne radars works

    20. Whats next? Choose several different parameters How to calculate vertical motion (more later) How much smoothing to do (more later) How to take out the terminal fall speed of precipitation particles Many others

    21. Wind Output @ 3.5 km

    22. Vertical cross-section

    23. Vertical cross-section

    24. Vertical cross-section

    25. Choosing a w calculation method

    26. Choosing the amount of smoothing

More Related