1 / 26

Nonlinear MHD Modeling of Tokamak Plasmas on Multiple Time Scales

Nonlinear MHD Modeling of Tokamak Plasmas on Multiple Time Scales. S.E. Kruger 1 , D.B. Brennan 2 , T. A. Gianakon 3 , D.D. Schnack 1 , and C.Sovinec 4 and the NIMROD Team. 1)Science Applications International Corp. San Diego, CA USA. 2) General Atomics San Diego, CA, USA.

beau-boyer
Télécharger la présentation

Nonlinear MHD Modeling of Tokamak Plasmas on Multiple Time Scales

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Nonlinear MHD Modeling of Tokamak Plasmas on Multiple Time Scales S.E. Kruger1, D.B. Brennan2, T. A. Gianakon3, D.D. Schnack1, and C.Sovinec4and the NIMROD Team 1)Science Applications International Corp. San Diego, CA USA 2) General Atomics San Diego, CA, USA 3) Los Alamos National laboratory Los Alamos, NM USA 4) University of Wisconsin-Madison Madison, WI, USA

  2. MHD Instabilities Often ClassifiedAccording to Time Scales • Ideal MHD instabilities grow on fastest time scales • g ~ tA • Large scale lengths: l/a ~ 1 • Linear codes have been successful in predicting many aspects of experimental results • Often cause “hard disruptions” • Slower time scales often classified as “resistive modes” • g ~ SatA where 0 < a < 1 • Small scale lengths: l/a << 1 • Linear theory less successful: • Requires “extended MHD” to describe physics • Often causes “soft beta limits”

  3. Behavior of Instabilities Near Marginal Point Important for Understanding Experiments Let: x0 = initial perturbation xobs=perturbation size able to be observed texp = duration of experiment from onset of mode Then there is a growth rate below which the experiment is experimentally stable Increased range in operating space depends on

  4. Mode Passing Through Instability Point Has Faster-Than-Exponential Growth • In experiment mode grows faster than exponential • Theory of ideal growth in response to slow heating (Callen, Hegna, Rice, Strait, and Turnbull, Phys. Plasmas 6, 2963 (1999)): Heat slowly through critical b: Ideal MHD:  Perturbation growth:  As mode does not grow because it is exactly at marginal point

  5. NIMROD Studying Behavior Near Marginal Point For Modes on Two Different Time Scales • Shot 87009 • Disruption when heated through b limit • Does simple analytic theory work? • What causes disruption? • Shot 86144 and 86166 • ITER-like discharge • Sawteeth • Nonlinear generation of secondary islands • Destabilization of neoclassical tearing mode (NTM)? • Tests both resistive MHD and closure models for Extended MHD

  6. NIMROD Uses Advanced Computational Techniques To Create Flexible Application Framework • Pseudo-spectral discretization in toroidal direction • Finite-element discretization in poloidal plane: • Can use either structured rectangular cells or unstructured triangular cells • Uses Lagrangian elements of arbitrary polynomial degree in structured cells. • The non-dissipative semi-implicit method used for temporal discretization • MPI used for efficient scaling

  7. NIMROD Solves the MHD form of the “Extended MHD Equations” • Momentum Equation • Generalized Ohm’s law: • Temperature Equations:

  8. DIII-D SHOT #87009 Observes a Mode on Hybrid Time Scale As Predicted By Analytic Theory High-b disruption slow heating Growth is slower than ideal, but faster than resistive Callen et.al, Phys. Plasmas 6, 2963 (1999)

  9. NIMROD Models Discharge Based on Equilibrium Profiles at t = 1681.7 msec Safety factor profile • Equilibrium reconstruction from experimental data • Negative central shear • Gridding based on equilibrium flux surfaces • Packed at rational surfaces • Bi-cubic finite elements Poloidal gridding Pressure contours

  10. NIMROD Simulations Begin Near Critical Beta For Ideal MHD Linear Stability • Present version of NIMROD requires conducting wall at outer flux surface • Critical bN for ideal instability larger than in experiment • NIMROD gives slightly larger ideal growth rate than GATO • NIMROD finds resistive interchange mode below ideal stability boundary

  11. Nonlinear Simulations With NIMROD Show Faster-Than-Exponential Growth • Initial condition: equilibrium below ideal marginal bN • Use resistive MHD • Impose heating source proportional to equilibrium pressure profile Log of magnetic energy in n = 1 mode vs. time S = 106 Pr = 200 gH = 103 sec-1  • Follow nonlinear evolution through heating, destabilization, and saturation

  12. NIMROD Scaling of Growth Rate of Mode Agrees with Experiment • NIMROD simulations also display super-exponential growth • Simulation results with different heating rates are well fit by x ~ exp[(t-t0)/t] 3/2 • Time constant scales as Log of magnetic energy vs. (t - t0)3/2 for 2 different heating rates • Compare with theory: Instability experiences no loss of confinement as it enters nonlinear stage consistent with experimental observations.

  13. Slower Growing Mode Also Observe Interesting Behavior Near Marginal Point DIII-D Shot 86166 observes loss of confinement when m/n=3/2 island: Why does 3/2 island appear at that particular sawtooth crash?

  14. Tearing Mode Appears When Near Ideal Marginal Stability Point as Represented by Large D’

  15. Test Linear Theory Using NIMROD With Two Nearly Identical Equilibria • Biggest difference is pressure near core

  16. Later Case Observes 3/2 Mode That Grows • Runs performed at S=106, Pr=1000 • Runs at these parameters and higher S still ongoing. • Nonlinear runs confirm importance of beta in tearing mode instability • Linear stability useful in quantitative predictions? Not clear.

  17. At Higher Pressure, m/n=3/2 Island Grows

  18. “Long-Pulse” Discharges on DIII-D Observe Modes Operating on a Longer Time Scale Shot 86144 similar to 86166 3/2 NTM 2/1 wall locking 1/1 sawteeth Disruption • Sawtoothing discharge • 3/2 NTM triggered at 2250 msec • 2/1 locks to the wall

  19. Model Discharge #86144 at t = 2250 msec Grid (Flux Surfaces) q - profile 2/1 3/2 1/1 • ITER-like discharge • q(0) slightly below 1

  20. Discharge is Unstable To Resistive MHD n = 1 linearly unstable Equilibrium n = 2 linearly unstable (D’ > 0) n = 2 nonlinearly driven by n = 1 Pressure and field lines S = 107 Pr = 103 g= 4.58 X 103 / sec gexp ~ 1.68 X 104 / sec

  21. Resistive 3/2 Islands Driven by n=1 Mode Are Too Small To Account for Experimental Observations 2/1 3/2 1/1 • Secondary islands are small in resistive MHD • Wexp ~ 6-10 cm • 3/2 island width decreases with increasing S • Need extended MHD to match experiment?

  22. Use “Heuristic Closure” to Model Neoclassical Tearing Mode • Resistive MHD is insufficient to explain DIII-D shot 86144 • Need “neo-classical” effects relevent for long mean-free-path regime: • Poloidal flow damping • Enhancement of polarization current • Bootstrap current • Simplified model captures most neo-classical effects • (T. A. Gianakon, S. E. Kruger, C. C. Hegna, Phys. Plasmas 9 (2002) 536) • Benchmarked against modified Rutherford Equation: Hegna PoP 6 (1999) 3980 Lutjens et.al. PoP 8 (2001) 4267

  23. Closures Agree with Modified Rutherford Equation in Determining The Stability Boundary • TFTR-like equilibrium • Comparison with modified Rutherford equation • Anisotropic heat conduction leads to threshold island size (Wd) • Initialize NIMROD with various seed island sizes • Look for growth or damping

  24. Use Analytic Theory to Help Choose Simulation Plasma Parameters of 86144.2250 3/2 island unstable stable • Use modified Rutherford equation • 3 values of anisotropic heat flux • 2 values of D¢ • Vacuum • Reduced by factor of 10 • Experimental island width ~ 0.1 m

  25. Plasma Parameters Severely Constrained By Ordering of Length Scales • Need Wd >> dv High S • High S means smaller secondary island Need smaller threshold • To get smaller threshold, need higher anisotropy • Quickly leads into realistic plasma parameters Nonlinear NTM calculations are extremely challenging!

  26. SUMMARY • NIMROD simulations of DIII-D discharges have several things in common: • Operation near marginal stability point • Self-consistent evolution to an unstable state • Simulations at realistic plasma parameters • Simulations on Fast Time Scale (87009-like discharge) • Heating through b limit • Super-exponential growth, in agreement with experiment and theory • Simulations on Slow Time Scale (shot #86144 and #86166) • Secondary islands driven by sawtooth crash, but must be near marginal stability point (high beta) • Resistive MHD insufficient, requires neo-classical closures • Must go to large S (~107) and anisotropy (kll/kprp ~ 109) to get proper length scales

More Related