1 / 1

Engineering Analysis – Spindle vs Router

Engineering Analysis – Spindle vs Router. Commercial Routers. Spindle Motors. Low to Medium Speeds (usually 400 to 24,000 RPM) Extremely low run out (typically less than 0.005mm/0.0002”) Need an inverter (capable of producing 0-400Hz @240VAC) Air or Water cooled options available

becca
Télécharger la présentation

Engineering Analysis – Spindle vs Router

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Engineering Analysis – Spindle vs Router Commercial Routers Spindle Motors • Low to Medium Speeds (usually 400 to 24,000 RPM) • Extremely low run out (typically less than 0.005mm/0.0002”) • Need an inverter (capable of producing 0-400Hz @240VAC) • Air or Water cooled options available • Higher average cost ($100 - $700) • Standardized collet sizes (ER11, ER20, R8, 3MT, etc.) • Quiet • High Speed (~25,000+ RPM) but with no control (one speed), will need aftermarket speed control • Large run out, not published as they are typically hobbyist and woodworking • Run directly from 120 VAC line power • Heat problem, not designed to be run continuously • Low average cost (Free - $200) • Brand specific collets • Loud • Higher cost of spindle motor justified by advantages • Inverter vs. speed control, ~ equal complexity (VFD) • More professional look and results from spindle • Justifies laser centering upgrade in the future

More Related