1 / 19

CCNA 3 v3.0 Module 6 Switch Configuration

CCNA 3 v3.0 Module 6 Switch Configuration. Objectives. Starting the switch Configuring the switch. LAN Design Goals. Functionality Scalability Adaptability Manageability. Physical Startup of Catalyst Switches. Switches typically have no power switch to turn them on and off.

benecia-urban
Télécharger la présentation

CCNA 3 v3.0 Module 6 Switch Configuration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CCNA 3 v3.0 Module 6 Switch Configuration

  2. Objectives • Starting the switch • Configuring the switch

  3. LAN Design Goals • Functionality • Scalability • Adaptability • Manageability

  4. Physical Startup of Catalyst Switches • Switches typically have no power switch to turn them on and off. • They simply connect or disconnect from a power source.

  5. Switch LED Indicators

  6. Verifying Port LEDs During Switch POST

  7. Connecting a Switch to a PC

  8. Examining Help in the Switch CLI

  9. Show Commands in User EXEC Mode

  10. Verifying the Catalyst Switch Default Configuration • show running-config • show interface • show vlan • show flash • show version

  11. Configuring the Catalyst Switch • To overwrite any existing configuration, follow these steps: • Remove any existing VLAN information by deleting the VLAN database file, vlan.dat from the Flash memory directory. • Erase the backup configuration file startup-config. • Reload the switch.

  12. Web Management Interface Configuring the Catalyst Switch

  13. Managing the MAC Address Table Switches learn the MAC addresses of PCs or workstations that are connected to their switch ports by examining the source address of frames that are received on that port.

  14. Configuring Static MAC Addresses

  15. Configuring Port Security

  16. Executing Adds, Moves, and Changes

  17. Managing Switch Operation • An administrator should document and maintain the operational configuration files for networking devices. • The most recent running-configuration file should be backed up on a server or disk. • The Cisco IOS Software should also be backed up to a local server. The Cisco IOS Software can then be reloaded to Flash memory if needed.

  18. Passwords • For security and management purposes, passwords must be set on the console and vty lines. • An enable password and an enable secret password must also be set.

  19. Firmware and IOS Images • IOS and firmware images are periodically released with bugs fixed, new features introduced, and performance improved. • If the network can be made more secure, or can operate more efficiently with a new version of the IOS, then the IOS should be upgraded

More Related