1 / 5

Laser chain status

Laser chain status. Massimo Petrarca & Marta Divall. Laser hardware. Two problems with the driver for the Oscillator 1) December 2008: hardware to supply current broke down Driver sent to company: 3/4weeks to repair it (delayed also because of Christmas time)

benito
Télécharger la présentation

Laser chain status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laser chain status Massimo Petrarca & Marta Divall

  2. Laser hardware Two problems with the driver for the Oscillator 1) December 2008: hardware to supply current broke down Driver sent to company: 3/4weeks to repair it (delayed also because of Christmas time) 2) February 2009: Two independent memories (current supplier board, SESAM) lost completely data, no hardware problem 2 days to repair it We ordered a second driver and diode as spare for the oscillator. We asked to get all the software to reprogram on site the memories of the driver. Negotiation has already started to buy a second Pockels Cell: this will allow us to perform studies on the amplifier laser behavior and (but not simultaneously) to have 2 photo injector lines simultaneously available, moreover useful as spare part .

  3. Amp1+Amp2 energy result Second amplifier has been modified: 4 passages through the rod  losses too high respect to the gain we need but higher energy extracted (higher is needed for us) 2 passages through the rod with a very good matching of laser beam spot size vs the rod dimension (fairily collimated beam with beam size of aobut rod size i.e. 10mm diameter)  low losses higher gain. With such harmonic generation scheme  320nJ on laser table  30% losses in beam line ~1.8nC (77% of nominal) old cathode (in micro bunch)  ~3% cathode quantum efficiency There is more energy available  conversion effiviency need to be improved.

  4. The end

  5. Micro pulses at 1.5 GHz ~10ps FWHM ~666ps; 10W 400us amplification window for AMP1 Macro pulse 200us amplification window for AMP2 Macro pulse Dt Dt Dt UV Green Laser overview 1.5 GHz Nd:YLF Oscillator + Nd:YLF Preamplifier 1047nm 3-pass Nd:YLF amplifier 2 pass Nd:YLF amplifier Optical gate (Pockelscell + Pulse picker) 4 2 Pulse picker IR Drive Beam (PHIN); Probe beam ~600ps=<Dt=<DtPC

More Related