200 likes | 395 Vues
Pinch Pots. • Inlaid slip design • Glazing basics. The basics. Wedge a small piece of clay Make a hole into the center with your thumb Pinch and pull the clay walls to shape your vessel, maintain moisture levels and work in stages of firmness Finish the lip, no cracks The Process.
E N D
Pinch Pots • Inlaid slip design • Glazing basics
The basics • Wedge a small piece of clay • Make a hole into the center with your thumb • Pinch and pull the clay walls to shape your vessel, maintain moisture levels and work in stages of firmness • Finish the lip, no cracks • The Process
Finishing Touches •Refine the form •Smooth and Refine the lip •Foot •Smooth the surface
The Process Carve the Design Clean the Design
Apply Slip Let dry to leather and carve
Steel wool Scrubber
Clear Glaze •ONLY AFTER BISQUE FIRING •NEVER APPLY GLAZE TO AN UNFIRED POT •Clear glaze is pink so you can see where you painted •Do not over or under apply, and allow coats to thoroughly dry
Grading PINCH VESSEL ONE _____I. Construction and Performance 75...Excellent and creative construction and performance. 74...Excellent construction and performance. 73...Above average construction and performance. 72...Average construction and performance. 71...Below average constructions and performance. 70...Weak construction and performance. _____II. Glazing 25 points will be graded on the glazed after the glaze fire. Totaling 100 points. PINCH VESSEL TWO 1.Following Objectives………………… 25 2.Composition ……………………………. 25 3.Performance………………………..….. 25 4.Presentation………………………………25 Total………………………………………….... 100