1 / 9

Brass Instrument Maintenance

Brass Instrument Maintenance. By Keren & Michael Barr North Georgia Band Instrument Service. General Brass Maintenance. Oil valves or rotors EACH TIME the instrument is played! NEVER use silicone lubricant on pistons or rotors – ONLY on trombone slides

bernad
Télécharger la présentation

Brass Instrument Maintenance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Brass Instrument Maintenance By Keren & Michael Barr North Georgia Band Instrument Service

  2. General Brass Maintenance • Oil valves or rotors EACH TIME the instrument is played! • NEVER use silicone lubricant on pistons or rotors – ONLY on trombone slides • DO NOT mix synthetic and natural (petroleum-based) valve oils • Move ALL slides each time the instrument is played

  3. General Brass Maintenance • Use spray furniture polish and a polishing cloth for removing fingerprints from lacquered instruments • Lubricate slide tubes once per week and before storage periods • Clean and dry all valves and valve casings before storage periods

  4. General Brass Maintenance • Check all waterkey springs, screws and corks weekly for damage • For lacquered instruments wipe down the finish weekly to remove fingerprints, oils, moisture and other debris • For silver instruments use only a specialized silver polishing cloth to avoid damaging the finish

  5. Chemical Cleaning • All brass instruments should be chemically cleaned every 12 months • Marching band instruments should be chemically cleaned at the end of the season, NOT during the summer! • Chemical cleaning removes the damaging lime and scale that cannot be removed by bathing or manual scrubbing the instrument

  6. Chemical Cleaning • Acid, lime and scale build-up can lead to dezincification or “Red Rot” • Dezincification is the breakdown of brass alloy – the zinc is removed from the brass leaving behind soft copper • Usually found in places where moisture collects • Pink spots, severe with black dots

  7. Piston Valves • Lubricate valves by unscrewing the top cap and pulling the piston about halfway out of the casing • Use about six drops of valve oil for each piston EVERY TIME THE HORN IS PLAYED • NEVER oil the valves through the slide tubes, bottom caps or through the mouthpipe – place the oil directly on the piston body • Do not spin the pistons when reinserting them in to the casings

  8. Rotary Valves • Lubricate rotors each time the horn is played by using bearing oil on the back bearing, spindle and stop arm. Use rotor oil through the outer slide tubes • Replace worn strings or linkage parts BEFORE they break • Removal of rotary valves is not recommended • DO NOT use a screwdriver to pry off the back bearing plate • Check all linkage screws and pivot points weekly for signs of wear

  9. Lubricating Rotary Valves

More Related