1 / 9

Autodesk Inventor: Part 1 Creating a Part

Autodesk Inventor: Part 1 Creating a Part. Inventor is used to design 3D models of the parts we design and allows us visualize what the robot will look like once it is build. PowerPoint by: Danica Chang. Getting Started. Open Inventor Press Run Autodesk Inventor, then press Next.

bethesda
Télécharger la présentation

Autodesk Inventor: Part 1 Creating a Part

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Autodesk Inventor: Part 1Creating a Part Inventor is used to design 3D models of the parts we design and allows us visualize what the robot will look like once it is build. PowerPoint by: Danica Chang

  2. Getting Started • Open Inventor • Press Run Autodesk Inventor, then press Next

  3. Creating a Part • To create a part, open a new Standard.ipt, then press OK • Create a 2D sketch of the part using the tools on the left hand side of the screen

  4. General Dimension • Using General Dimension, specify the length of each each component of the sketch • Once you are done, press the button at the top of the screen

  5. 3D Mode • Now you are in 3D mode. • The 2 most useful buttons you will need to use are Extrude and Hole • Extrude: adds depth to the sketch • Hole: creates a hole

  6. Extrude • To Extrude, press and highlight the portion of the sketch you would like to extrude. • Indicate the length and direction you want your part to extend • Then press OK • To rotate the part, press on the top of the screen

  7. Hole • To make a hole, you must first make another sketch to place this feature on. • Rotate to face the side you want to put a hole in • Press and press the face that you want the sketch to be on. • In the sketch, use to indicate where the center of the hole should be. (don’t forget to use ) • Once you are done with the sketch, press

  8. Hole continued… • Now press • Indicate which holes you would like to drill • Then determine length and diameter of the hole. • Press OK

  9. There are many other features that Inventor offers. Feel free to try all of the different tools. We have only covered the most frequently used tools. • In the next Inventor lesson, we will learn to put multiple parts together to create an assembly.

More Related