1 / 27

Phasor-Domain Equations

Phasor-Domain Equations. Transmission line equations — time domain: Time domain  Phasor domain. Transmission line equations — phasor domain:. Phasor-Domain Equations. Advantages of Phasor-Domain Representation

binh
Télécharger la présentation

Phasor-Domain Equations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Phasor-Domain Equations Transmission line equations — time domain: Time domain  Phasor domain Transmission line equations — phasor domain:

  2. Phasor-Domain Equations • Advantages of Phasor-Domain Representation • Reduction from partial differential equation to ordinary differential equation — so that it is easier to solve • Allows generalization: • Advantages of Time-Domain Representation • Allows study of transients

  3. Phasor-Domain Equations • Second-Order Equations: • with g = complex propagation constant a = Re(g ) = attenuation constant (Np/m) b = Im(g ) = phase constant or wavenumber (rad/m) NOTES:  We pick a and b so that both are positive  In a passive medium, a is always positive; it can be negative in an active medium [An active medium, like a laser, has an energy source; a passive medium does not and must always lose energy.]

  4. Phasor-Domain Equations • The second-order equations have the general solutions • are not independent • We may also write: where is the characteristic impedance NOTE: Z0 (Ulaby’s notation)  ZC (Paul’s notation)

  5. Phasor-Domain Equations • Returning to the time domain: • We first write • from which we obtain Phase velocity = up = w/b

  6. Phasor-Domain Equations Example: Ulaby Exercise 2.4Question: A two-wire air line has the following parameters: R′ = 0.404 m/m, L′ = 2.00 mH/m, G′ = 0, C′ = 5.56 pF/m. For operation at 5 kHz, determine (a) the attenuation coefficient a, (b) the wavenumber b, (c) the phase velocity up, and the characteristic impedance Z0. Answer:w = 2 × 3.14159 × (5×103 s–1) = 3.14159×104 s–1. R′ + jwL′ = (4.04000×10–4 + j×3.14159×104 × 2.00000×10–6 ) /m = (4.04000×10–4 + j×6.28318×10–2 ) /m = 6.28319×10–2 × exp( j×1.56436) /m . G′ + jwC′ = j×1.74673×10–7 –1/m = 1.74673×10–7 × exp( j×1.57080) –1/m. Note the small difference in phases! Six digits of accuracy are needed to keep three digits in the attenuation coefficient. g 2 = 1.09750×10–8 × exp( j×3.13156) m–2, so that g = 1.04762×10–4 × exp( j×1.56758) m–1 = 3.37×10–7 + j×1.04761×10–4, so that • = 3.37×10–7 Np/m and b = 1.05×10–4 rad/m. We have up = w / b = (3.142/1.048) ×108 = 3.00 ×108 m/sand Z0 = {(6.283×10–2 / 1.747×10–7 ) exp[ j×(1.56436 – 1.57080)]}1/2 = (600 – j×1.93) W

  7. Lossless Transmission Line • Specializing to the case of no loss (R′ = 0, G′ = 0 ): • We will later show that for any TEM transmission line: m = magnetic permeability e = electrical permittivity • For any insulating material that would be used in a transmission line, , where m0 is the vacuum permeability. — The value for m0 is exact and defines the relation between B and H. • By contrast, the values for e differ significantly for different materials. We write: e = er e0, where er is referred to as the relative permittivity, and is the vacuum permittivity

  8. Lossless Transmission Line • We now have: • In optics, we define an index of refraction, n = c / up, so that

  9. Lossless Transmission Line Coaxial Two wire Parallel plane K • The impedance relation: • is a bit more complex. It involves a geometric factor K. The vacuum impedance of 377W is a very important number • Loads with lower impedance have large magnetic near fields • Loads with higher impedance have large electric near fields • EMI properties are very different in the two cases! Table of Geometric Factor K

  10. Lossless Transmission Line Voltage Reflection: When a = 0, our phasor relations become At the load, we have which implies and defines the voltage reflection coefficient G Load impedances and reflection coefficients are usually complex!

  11. Lossless Transmission Line Example: Ulaby Exercise 2.7Question: A 50  lossless transmission line is terminated in a load impedance ZL = (30 – j200) . Calculate the voltage reflection coefficient at the load. Answer: G = (ZL – Z0 ) / (ZL + Z0 ) = (30 – j200 – 50) / (30 – j 200 + 50) = (–20 – j200) / (80 – j 200) = 201exp(– j1.67) / 215exp (– j1.19)= 0.93exp (– j0.48). NOTE: – 0.48 rads = – 28o. Writing G = |G| exp ( jqr) , we find qr = – 0.48 rads.

  12. Lossless Transmission Line • Standing Waves • After using the relation in the phasor equations, • We then find • so that the amplitude of the voltage varies sinusoidally with z. • This pattern is called a standing wave. • It comes from the interference of forward- and backward- propagating waves

  13. Lossless Transmission Line • Standing Waves • The voltage and current maxima and minima are 180o out of phase • The amplitude multiplies a cos(wt) dependence with a complicated but periodicz-variation. • The maxima and minima are spaced l / 2 apart Ulaby Figure 2-11 Figure Parameters: |G| = 0.3, qr = 30o Z0 = 50 W

  14. Lossless Transmission Line • Standing Waves • The total dependence of the standing wave voltage is Ulaby 2001 CD

  15. Lossless Transmission Line • Standing Waves • For a matched load (ZL = Z0), there is no standing wave • For a short-circuited load (ZL = 0) or an open-circuited load (ZL = ), there are complete reflections and an oscillation depth of 100% • With |G| = 1, there are points where the voltage is exactly zero, spaced l / 2 apart Ulaby Figure 2-12

  16. Lossless Transmission Line • Standing Waves • We will designate the location of the maxima as lmax = –z, so thatlmax is a positive number (since the load is at z = 0). Only n-values that satisfy lmax 0 are allowed • The voltage standing wave ratio (VSWR or SWR) gives the gives the oscillation depth. It is defined:

  17. Lossless Transmission Line Example: UlabyExercise 2.11Question: A 140  lossless line is terminated in a load impedance ZL = (280 + j182) . If l = 72 cm, find (a) the reflection coefficient G, (b) the VSWR S, (c) the locations of the voltage maxima and minima. Answer: (a)G = (ZL – Z0 ) / (ZL + Z0 ) = (280 + j182 – 140) / (280 + j 182 + 140) = 230 exp( j0.915) / 458exp (j0.409) = 0.50exp ( j0.51). NOTE: 0.51 rads = 29o. (b) S = (1 + |G|) / (1 – |G|) = (1 + 0.502) / (1 – 0.502) = 3.0. (c) lmax = (0.506 × 72 / 4p + n × 72 / 2) cm = 2.9 cm, 39 cm, 75 cm,…; lmin = (0.506 × 72 / 4p + 18 + n × 72 / 2) cm = 21 cm, 57 cm, 93 cm,…

  18. Lossless Transmission Line Input Impedance With standing waves, the voltage-to-current ratio, which is referred to as the input impedance, varies as a function of position Of particular interest is the input impedance at the generator, z = –l

  19. Lossless Transmission Line Input Impedance From the standpoint of the generator circuit, the transmission line appears as an input impedance , so that From the standpoint of the transmission line Combining these relations… Ulaby Figure 2-14

  20. Lossless Transmission Line Input Impedance …we conclude Thus, we can now relate the wave parameters, to the transmission line parameters and the input parameters

  21. Lossless Transmission Line L Paul Example 6.7 (extended)Question: A line 2.7 m in length is excited by a 100 MHz source asshown in the figure. Determine the source and load voltages. Determine the voltages and the current everywhere in the transmission line Answer: We will work in Ulaby’s notation, and our first task is to translate Paul’s problem specification into that notation: Paul Figure 6.21

  22. Lossless Transmission Line Paul Example 6.7Answer (continued):* (1) Find the reflection coefficient: (2) Find the propagation factor *NOTE: I am using MATLAB to calculate values. So, the calculations are good to15 places, although I only report three.

  23. Lossless Transmission Line Paul Example 6.7Answer (continued): (3) Find the input impedance:

  24. Lossless Transmission Line Paul Example 6.7Answer (continued): (4) Find the input voltage:

  25. Lossless Transmission Line Paul Example 6.7Answer (continued): (5) Find the load voltage:

  26. Lossless Transmission Line Paul Example 6.7Answer (continued): (6) Write the time domain voltages: (7) Find the phasor domain voltage and current in the transmission line

  27. Lossless Transmission Line Paul Example 6.7Answer (continued): (8) Find the time domain voltage and current in the transmission line: (9) Checks:

More Related