1 / 40

ROMS User Meeting Grenoble, 6-8 October 2008

breanna-kramer
Télécharger la présentation

ROMS User Meeting Grenoble, 6-8 October 2008

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 4-Dimensional Variational Assimilation of Satellite Temperature and Sea Level Data in the Coastal Ocean and Adjacent Deep SeaJohn WilkinJavier Zavala-GarayJulia Levinand Weifeng Gordon ZhangInstitute of Marine and Coastal Sciences Rutgers, The State University of New JerseyNew Brunswick, NJ, USA jwilkin@rutgers.edu http://marine.rutgers.edu ROMS User MeetingGrenoble, 6-8 October 2008

  2. EAC: deep ocean adjacent to narrow continental shelf influenced by proximity of boundary current large (250 km) mesoscale eddies generated locally by boundary current separation process 2000 x 1600 km model domain; 25 km resolution MAB: wide shallow shelf separated from Gulf Stream by the Slope Sea Shelf/Slope Front (~0.3 m/s) at shelf edge Gulf Stream rings frequently enter Slope Sea and impact shelf 800 x 300 km model domain; 5 km resolution ROMS* models of two Western Boundary Current regimes: East Australian Current (EAC) and Middle Atlantic Bight (MAB) * http://myroms.org

  3. NERACOOS Altimetry: Jason-n, ERS

  4. NERACOOS Altimetry: Jason-n, ERS MARCOOSCODAR, gliders …

  5. IS4DVAR* • Given a first guess (the forward trajectory)… • and given the available data… *Incremental Strong Constraint 4-Dimensional Variational data assimilation

  6. IS4DVAR • Given a first guess (the forward trajectory)… • and given the available data… • what change (or increment) to the initial conditions (IC) produces a new forward trajectory that better fits the observations?

  7. The “best fit” becomes the analysis assimilation window ti = analysis initial time tf = analysis final time The strong constraintrequires the trajectory satisfies the physics in ROMS. The Adjoint enforces the consistency among state variables.

  8. The final analysis state becomes the IC for the forecast window assimilation window forecast tf = analysis final time tf + t = forecast horizon

  9. Forecast verification is with respect to data not yet assimilated assimilation window forecast verification tf + t = forecast horizon

  10. Basic IS4DVAR procedure: Lagrange function Lagrange multiplier J = model-data misfit The “best fit” simulation will minimize L: model-data misfit is small, and model physics are satisfied

  11. Basic IS4DVAR procedure: Lagrange function Lagrange multiplier J = model-data misfit The “best” simulation minimizes L: At extrema of L we require:

  12. Basic IS4DVAR procedure: (1) Choose an (2) Integrate NLROMS and save (a) Choose a (b) Integrate TLROMS and computeJ (c) Integrate ADROMS to yield (d) Compute (e) Use a descent algorithm to determine a “down gradient” correction to that will yield a smaller value of J (f) Back to (b) until converged (3) Compute new and back to (2) until converged J = model-data misfit Outer-loop (10) Inner-loop (3) NLROMS = Non-linear forward model; TLROMS = Tangent linear; ADROMS = Adjoint

  13. xb= model state (background) at end of previous cycle, and 1st guess for the next forecast In 4DVAR assimilation the adjoint gives the sensitivity of the initial conditions to mis-match between model and data A descent algorithm uses this sensitivity to iteratively update the initial conditions, xa, (analysis) to minimize Jb+ Jo xb previous forecast 0 1 2 3 4 time Observations minus previous forecast Adjoint model integration is forced by the model-data error dx

  14. How is observed information (SLA, SST) transferred tounobserved state variables (velocity) andprojected from surface to subsurface? Three ways: (1) The Adjoint Model (2) Empirical statistical correlations to generate “synthetic XBT/CTD” • In EAC assimilation get T(z),S(z) from vertical EOFs of historical CTD observations regressed on SSH and SST (3) Modeling of the background covariance matrix • e.g. via the hydrostatic/geostrophic relation

  15. Mid-Atlantic Bight ROMS Model for IS4DVAR 5 km resolution for IS4DVAR1 km downscale forecast • 3-hour forecast meteorology NCEP/NAM • daily river flow (USGS) • boundary tides (TPX0.7) • nested in ROMS MAB-GoM (which is nested in Global-HyCOM*) • nudging in a 30 km boundary zone • radiation barotropic mode (*which assimilates altimetry)

  16. Mid-Atlantic Bight ROMS Model for IS4DVAR 5 km resolution IS4DVAR model embedded in … ~20 km outer model:ROMS MAB-GoM, or…NCOM or global HyCOM+NCODA

  17. Mid-Atlantic Bight ROMS Model for IS4DVAR 5 km resolution for IS4DVAR1 km downscale for forecast EAC eddies are resolved by AVISO multi-satellite SLA MAB SLA is more anisotropic with shorter length scales due to flow-topography interaction Use along-track altimetry: • 4DVar uses the data at time of satellite pass • model “grids” along-track data by simultaneously matching observations and dynamical and kinematic constraints • need coastal altimetry corrections

  18. Mid-Atlantic Bight ROMS Model for IS4DVAR Model variance (without assimilation) is comparable to along-track in Slope Sea, but not shelf-break AVISO gridded SLA differs from along-track SLA in Slope Sea (4 cm) and Gulf Stream (10 cm)

  19. The altimeter anomalies are with respect to the long-term mean and therefore contain seasonal variability, but this is small compared to the mesoscale in the MAB.

  20. The altimeter anomalies are with respect to the long-term mean and therefore contain seasonal variability, but this is small compared to the mesoscale in the MAB. ROMS assimilates total SSH. Therefore we need to add a mean dynamic topography (MDT) to the anomaly data prior to assimilation. This MDT is computed by 4DVAR analysis using a regional 3-D T-S climatology computed from historical hydrographic data

  21. Mean Dynamic Topography (MDT) is computed by 4DVAR analysis of a regional 3-D T-S climatology computed from historical hydrographic data.4DVAR analysis is forced with annual mean meteorology and open boundary conditions.

  22. High frequency variability: model and data issues ROMS includes high frequency variability typically removed in altimeter processing (tides, storm surge) The IS4DVAR cost function, J, samples this high frequency variability, so it must be either (a) removed from the model or (b) included in the data • Our approach: • Run 1-year ROMS (no assimilation) forced by boundary TPX0.7 tides; compute ROMS tidal harmonics • de-tide along-track altimetry (developmental in MAB) • add ROMS tides to de-tided altimeter data • thus the observations are adjusted to include model tide • assimilate – high frequency mismatch of model and altimeter is minimized and cost function is, presumably, dominated by sub-inertial frequency dynamics

  23. High frequency variability: model and data issues The IS4DVAR increment is to the initial conditions of the analysis window, and this itself generates HF variability (inertial oscillations)

  24. High frequency variability: model and data issues The IS4DVAR increment is to the initial conditions of the analysis window, and this itself generates HF variability (inertial oscillations) • Our approach: • Apply a short time-domain filter to IS4DVAR initial conditions • Reduces inertial oscillations in the Slope Sea but removes tides • Tides recover quickly • – approach needs refinement – possibly using 3-D velocity harmonic analysis of free running model

  25. High frequency variability: model and data issues Without a subsurface synthetic-CTD relationship, the adjoint model can erroneously accommodate too much of the SLA model-data misfit in the barotropic mode This sends gravity wave at along the model perimeter • Our approach: • Repeat (duplicate) the altimeter SLA observations at t = -6 hour, t=0 and t = +6 hour but with appropriate time lags in the added tide signal • These data cannot easily be matched by a wave • We are effectively acknowledging the temporal correlation of the sub-tidal altimeter SLA data

  26. High frequency variability: model and data issues • Our approach: • Repeat (duplicate) the altimeter SLA observations at t = -6 hour, t=0 and t = +6 hour but with appropriate time lags in the added tide signal • These data cannot easily be matched by a wave • We are effectively acknowledging the temporal correlation of the sub-tidal altimeter SLA data

  27. High frequency variability: model and data issues • Other possible HF issues: • Should we include sea level air pressure in ROMS and attempt to model the inverse barometer response? • What about remote HF variability from coastal trapped waves? • – regional MOG2D?

  28. Sequential assimilation of SLA and SST Before attempting assimilation of COOS observatory in situ data for a full reanalysis, we are assimilating satellite data (SSH and SST) to tune for the assimilation parameters (e.g., horizontal and vertical de-correlation scales, assimilation window, etc.). We use the unassimilated hydrographic data to evaluate how well the adjoint model is propagating information between variables, and in space and time. This experiment also serves as a prototype for a real-time forecast system.

  29. Sequential assimilation of SLA and SST • Reference time is days after 01-01-2006 • 3-day assimilation • window (AW) • Daily MW+IR blended SST (available real time) • SSH = Dynamic topography + ROMS tides + Jason-1 SLA (repeated three times) • For the first AW we just assimilate SST to allow the tides to ramp up.

  30. Sequential assimilation of SLA and SST First AW (0<=t<=3 days) ROMS SST and currents at 200 m ObservedSST

  31. Sequential assimilation of SLA and SST Second AW (3<=t<=6 days) ROMS SST and currents at 200 m ObservedSST

  32. Sequential assimilation of SLA and SST Second AW (3<=t<=6 days) ROMS SST and currents at 200 m ObservedSST Jason-1 data

  33. Sequential assimilation of SLA and SST Second AW (3<=t<=6 days) ROMS SST and currents at 200 m ObservedSST Jason-1 data XBT transect (NOT assimilated)

  34. Sequential assimilation of SLA and SST ROMS-IS4DVAR fits reasonably well the assimilated observations (SST and SSH), but how well does it represent unassimilated data? ROMS solutions along the transect positions [lon,lat,time]

  35. Sequential assimilation of SLA and SST ROMS-IS4DVAR fits reasonably well the assimilated observations (SST and SSH), but how well does it represent unassimilated data? ROMS solutions along the transect positions [lon,lat,time]

  36. Future work Evaluation of the forward model shows significant forecast skill error due to biases in the boundary and surface forcing. We will therefore use climatology as an additional data source in the assimilation procedure. After bias correction, we will assimilate all the available COOS data (CODAR surface currents, glider T-S, CTD, XBT, moorings) for 2006 to produce a MAB reanalysis. In a true operational forecast system the state of the atmosphere and boundary forcing is not known in advance, so we are developing techniques to produce adjoint-based ensemble techniques that will allow us to place error bars to the forecast.

  37. Summary Assimilation of gridded AVISO SLA is not appropriate in MAB because of length/time scales of variability and anisotropy Assimilation of along-track SSH successful but requires consideration of … • tidal signal in data-model (lest it dominate cost function) • time filtering IS4DVAR increment to reduce inertial oscillations • time correlation of SLA obs to suppress waves in adjoint solution Subsurface projection (in addition to Adjoint) is in development using multi-variate background covariance • Less straightforward than in EAC … • Shelf/Slope Front and shelf mean circulation reach seafloor so geostrophic balance must acknowledge the bathymetry jwilkin@rutgers.eduhttp://marine.rutgers.edu ROMS User MeetingGrenoble, 6-8 October 2008

More Related