1 / 12

Tire Sidewall Markings

Tire Sidewall Markings. Information Contained:. basic dimensions week it was produced types of materials used internally to reinforce the rubber maximum inflation pressures and loads certifies the tire meets industry standards and government regulations

caldwell-flores
Télécharger la présentation

Tire Sidewall Markings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tire Sidewall Markings

  2. Information Contained: • basic dimensions • week it was produced • types of materials used internally to reinforce the rubber • maximum inflation pressures and loads • certifies the tire meets industry standards and government regulations • not all information is branded on every tire

  3. Tire Size – P215/65 R15 • Tire Type: Identifies vehicle type. P denotes passenger vehicle; LT denotes Light Truck. • Tire Width: Measured in millimetres. E.g. 215 • Aspect Ratio: The ratio of the height of the tire's cross-section to its width. E.g. 65 • Construction: R denotes radial, whereas B indicates a bias construction. • Wheel Diameter: The greatest distance across the wheel from tread to tread , measured in inches. E.g. 15

  4. Load Index and Load Capacity • Load Index: The maximum load in pounds (lb.) that the tire can support when properly inflated based on the Load Index Chart. E.g. 89

  5. Speed Rating • Speed Rating: Indicates the maximum service speed for the tire based in the speed-rating chart. E.g. " H " indicates a maximum tolerable speed of 210 km/h (130 mph).

  6. UTQG Rating • UTQG stands for Uniform Tire Quality Grading. • based on treadwear, traction and temperature capabilities

  7. Treadwear • based on the wear rate of the tire • E.g. a tire with a 200 treadwear rating would wear twice as long as a tire with a 100 rating.

  8. Traction and Temperature • Traction Grades: Identify the tire's ability to stop on wet pavement E.g. Traction A • AA: Very Best • A: Best • B: Intermediate • C: Acceptable • Temperature Grades: Denote the tire's resistance to the generation of heat. Excessive temperatures can lead to tire failure. E.g. Temperature A • A: Best • B: Intermediate • C: Acceptable

  9. Severe Snow Tires • A mountain/snowflake symbol branded on the tire's sidewall identifies tires that met the required performance in snow testing. • M+S (Mud + Snow): Indicates this is an all-season tire.

  10. Tire Identification Number • Tires sold in Canada have a number with information about when and where the tire was produced. • Example: • B3 : Indicates the manufacturer and plant code • CD : Tire size code • E52X : Optional • 2602 : Week and year of manufacture (in this example the 26th week of 2002) • The maple leaf symbol indicates this is a Canadian made tire and certifies that it meets all of Transport Canada's requirements.

  11. Load & Pressure Marking • Tire pressures are normally measured in "pounds per square inch" (psi), Kilopascals (kPa), or bars of pressure (bars: • MAX. LOAD 630 kg (1389 lbs)MAX. PRESSURE 300 kPa (44 psi)

More Related