1 / 10

Design of a SK Filter

This document outlines the design criteria for the SK Filter operating under AC voltage conditions. Key parameters include the ratio of resistances R2/R1 equal to 1, capacitance ratios C2/C1 also equal to 1, quality factor Q set to 1/2, and constant K equal to 1. The design specifically incorporates a capacitor value of 100 nF and targets a fundamental frequency of 10 KHz. Additionally, the analysis will cover trace options for frequency response and phase response, providing valuable insights into the filter's performance.

candy
Télécharger la présentation

Design of a SK Filter

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design of a SK Filter

  2. SK Filter

  3. AC Voltage

  4. Design Criteria • R2/R1=1 • C2/C1=1 • Q=1/2 • K=1 • Design for • C=100 nF • fo=10 KHz

  5. AC analysis

  6. Add Trace

  7. Options

  8. Frequency Response

  9. Phase Response

More Related