1 / 6

Find the IP address for Rockspace extender setup

Therefore, It removes the problem of loose or weak connectivity from your house. Earlier, where you feel that the signal coming out from your router is unable to reach. Can now reach very smoothly using this Rockspace extender setup. https://rerockspace-locals.com

carlosward
Télécharger la présentation

Find the IP address for Rockspace extender setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Find the IP address for Rockspace extender setup

  2. The wireless extender by Rockspace local that you are using helps to repeat the wireless signals of the access point you have in your home. Therefore, It removes the problem of loose or weak connectivity from your house. Earlier, where you feel that the signal coming out from your router is unable to reach. Can now reach very smoothly using this Rockspace Extender Setup

  3. Re.rockspace.local before setup instructions • It can be set-up either using a wired or wireless connection. • But for better and fair results, always use wired connection. • While installing the extender with the router use an Ethernet cable.

  4. Have you already connected your router to the Rockspace Wireless extender? • Then use the default IP address. • Or your router will automatically assign a different IP address to the extender. • Moreover, it will avoid any kind of IP conflicts.

  5. Re.rockspace.local Extender setup steps • Don't let your router assign the IP address to the extender, automatically. You should assign a fixed IP address through the setup to your range extender. • To get an easier option to connect your extender with the internet connection, go into the setup page. • And select a fixed IP address. It will allow you easier access to the extender. • This will be very helpful for you; in case you notice that your Rockspace wireless range extender is rebooting itself.

  6. 5. Whenever it starts booting up, it will try to get an IP address from the router. 6. Go to the web-based setup page of your Rockspace range extender and browse it. 7. Select the option "Setup" and get a static IP address under the section of "Network Setup Page." 8.Enter the Subnet Mask, Default gateway, and the Internet IP address, all according to your wish, for your Rockspace extender setup. Click SAVE, because after clicking the save tab, you can save the settings that you have made.

More Related