1 / 33

Module 1: Installing and Upgrading to Exchange Server 2003

Module 1: Installing and Upgrading to Exchange Server 2003. Video. Overview. Installing Exchange Server 2003 Installing Exchange Server 2003 in a Clustered Environment Installing and Using Exchange Management Tools and Utilities Upgrading from Exchange 2000 Server to Exchange Server 2003

carol
Télécharger la présentation

Module 1: Installing and Upgrading to Exchange Server 2003

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Module 1:Installing and Upgrading to Exchange Server 2003

  2. Video Overview • Installing Exchange Server 2003 • Installing Exchange Server 2003 in a Clustered Environment • Installing and Using Exchange Management Tools and Utilities • Upgrading from Exchange 2000 Server to Exchange Server 2003 • Discussion: Installing and Upgrading to Exchange Server 2003

  3. Lesson: Installing Exchange Server 2003 • Hardware and System Requirements for Exchange Server 2003 • Environment Requirements Checklist for Exchange Server 2003 • Demonstration: How to Run ForestPrep and DomainPrep • Components That Can Be Configured During Setup • Demonstration: How to Install Exchange Server 2003 • What Is an Unattended Installation? • How to Perform an Unattended Installation of Exchange Server 2003 • How to Verify That Installation of Exchange Server 2003 Was Successful

  4. Hardware and System Requirements for Exchange Server 2003

  5. Make sure Active Directory and DNS are installed and configured • Get appropriate Active Directory permissions • Be a member of an Active Directory domain • Make sure that computers in the same Exchange organization are also in the same Active Directory forest • Install Exchange 2003 before upgrading to Windows Server 2003 family • Run Windows 2000 SP3 or later or Windows Server 2003 family • Run ForestPrep once • Designate an Exchange Full Administrator account • Create an Exchange administrative group structure before installing Exchange • Run DomainPrep to prepare your domains for Exchange • Install and configure the appropriate services Environment Requirements Checklist for Exchange Server 2003

  6. Demonstration: How to Run ForestPrep and DomainPrep Your instructor will show a presentation that demonstrates how to run ForestPrep and DomainPrep To run ForestPrep, click To run DomainPrep, click

  7. Microsoft Exchange Messaging and Collaboration Services • Microsoft Exchange Connector for Lotus Notes • Microsoft Exchange Connector for Novell GroupWise • Microsoft Exchange Calendar Connector • Microsoft Exchange System Management Tools • Microsoft Exchange 5.5 Administrator configure Administrator Server Components That Can Be Configured During Setup

  8. Your instructor will show a presentation that demonstrates how to install Exchange Server 2003 Demonstration: How to Install Exchange Server 2003

  9. install install Use it when you: install • Install additional Exchange 2003 computers • Install Exchange 2003 System Management Tools • Run DomainPrep Exchange Server 2003 Setup CD plus .ini file What Is an Unattended Installation? Unattended installation An installation of Exchange 2003 that proceeds and completes without any prompting from a user

  10. .ini .ini .ini Install Install Install How to Perform an Unattended Installation of Exchange Server 2003 1 Create initialization file Administrator Exchange is installed on designated computers 3 2 Run Setup using the .ini file

  11. How to Verify That Installation of Exchange Server 2003 Was Successful Test Active Directory Users and Computers Send a test message Test Exchange System Manager Use these utilities to troubleshoot, if required: 1 2 3 4 • Services MMC • Event Viewer and the setup log file • Windows Explorer Exchange Server 2003 Administrator

  12. Lesson: Installing Exchange Server 2003 in a Clustered Environment • Multimedia: How Exchange Server 2003 Uses Windows Clustering • Hardware Requirements Checklist for an Exchange Server 2003 Cluster • Types of Exchange 2003 Cluster Configurations • Recommended Exchange Server 2003 Cluster Configuration • Considerations for Using Clusters • How Failover Occurs on an Active/Active Cluster vs. an Active/Passive Cluster • Permissions Required to Install and Configure an Exchange Virtual Server • Demonstration: How to Install Exchange Server 2003 in a Clustered Environment

  13. Multimedia: How Exchange Server 2003 Uses Windows Clustering This presentation showshow Exchange Server 2003 can use Windows Clustering to improve fault tolerance for your Exchange hardware

  14. Node 1 C: Network Adapter Local Disk Disk Shared Disk Node 2 C: Local Disk Hardware Requirements Checklist for an Exchange Server 2003 Cluster To use a cluster, you must have: • Two or more nodes • Drives in each node from which operating system starts • A separate mass-storage controller for shared disk • A shared disk • Two network adapters in each node

  15. Active/Active Configuration Active/Passive Configuration EVS EVS EVS Types of Exchange Server 2003 Cluster Configurations

  16. Active/passive configurations: EVS EVS EVS • Scale as well as stand-alone Exchange servers • Are more reliable • Have better failover performance • Will support clusters with up to eight nodes Recommended Exchange Server 2003 Cluster Configuration Active/Passive Configuration

  17. In active/passive clusters, Exchange Virtual Servers must equal one less than the number of nodes • Exchange 2003 is limited to four storage groups per server, which can create problems with the active/active configuration • For both cluster types, proactively monitor virtual memory performance Considerations for Using Clusters

  18. Resource Group Resource Group Active/active configuration Node A EVS Disk Resource System Attendant IP Address Network Name EVS Disk Resource System Attendant IP Address Network Name When one of the nodes fails The surviving node takes over the failed EVS and continues to service client computers When the node is restored to service, the EVS is failed back Public Network Private Network EVS EVS EVS EVS Client Node B How Failover Occurs on an Active/Active Cluster vs. an Active/Passive Cluster Preference List Node B Active/passive configuration Active/active configuration Node A The cluster service checks the preference list and moves the failed EVS to the passive node on the list. The passive node starts servicing client computers When the node is restored to service, the EVS is failed back One or more nodes of the Exchange server cluster host active EVSs while one or more nodes remain passive. When the node is restored to service, the EVS is failed back The surviving node takes over the failed EVS and continues to service client computers When one of the nodes fails Public Network Private Network Client Node B

  19. Permissions Required to Install and Configure an Exchange Virtual Server Permissions

  20. Demonstration: How to Install Exchange Server 2003 in a Clustered Environment Your instructor will show a presentation that demonstrates how to install Exchange Server 2003 in a clustered environment

  21. Review the scenarios and determine possible solutions with a partner Discuss your solutions with the rest of the class 1 2 Practice: Installing Exchange Server 2003 in a Clustered Environment

  22. Lesson: Installing and Using Exchange Management Tools and Utilities • Management Tools and Utilities for Administering Exchange • Platforms from Which You Can Administer Exchange • Permissions Required to Access Objects in Exchange System Manager • Demonstration: How to Install Exchange System Manager • How to Install and Run Windows Support Tools • How to Create a Custom MMC for Exchange Administration

  23. Management Tools and Utilities for Administering Exchange • Exchange System Manager • Active Directory Users and Computers • Cluster Administrator • ADSI Edit • LDP utility • Active Directory Schema snap-in • IIS snap-in • DNS snap-in

  24. Platforms: To use Windows XP: • Windows 2000 Server SP3 • Windows 2000 Professional SP3 • Windows Server 2003 family • Windows XP SP1 • The computer must belong to a domain in the Active Directory forest where the Exchange Servers exist • Must be running SP1 or later • The Windows Server 2003 Administration Tools Pack must be installed • The SMTP service must be installed Platforms from Which You Can Administer Exchange

  25. Permissions Required to Access Objects in Exchange System Manager Permissions

  26. Demonstration: How to Install Exchange System Manager Your instructor show a presentation that will demonstrate how to install Exchange System Manager

  27. Practice How to Install and Run Windows Support Tools To install Windows Support Tools: To run ADSI Edit: Open the Adsiedit.msc console file by using Windows Explorer or use Add/Remove Snap-in in MMC to add the ADSI Edit snap-in to any .msc file At a command prompt, type x:\support\tools\suptools.msi Follow the steps in the wizard 1 2 To run the LDP utility: Type Ldp.exe at the command prompt To install Active Directory Schema: Register its DLL Add the snap-in to any .msc file 1 2

  28. Practice How to Create a Custom MMC for Exchange Administration To create a custom MMC: Click Start, click Run, type mmc and then click OK In the Console1 window, add the Exchange System snap-in On the Extensions tab, select the snap-in from the Snap-ins that can be extended box Set what extensions you want to include in the Available extensions box Save the console and distribute it 1 2 3 4 5

  29. Lesson: Upgrading from Exchange 2000 Server to Exchange Server 2003 • The Differences Between Exchange 2000 Server and Exchange Server 2003 • Requirements Checklist for Upgrading to Exchange Server 2003 • Demonstration: How to Upgrade from Exchange 2000 Server to Exchange Server 2003

  30. The Differences Between Exchange 2000 Server and Exchange Server 2003 New in 2003: Removed since 2000: • Improved client access • Improved security • Improved management • New deployment and upgrade utilities • Improved ADC utilities • New pfMigrate utility • Support for real-time collaboration features • Support for MS Mail and Lotus cc:Mail connectors • Drive M mapping • Key Management Service Exchange Server 2003

  31. Requirements Checklist for Upgrading to Exchange Server 2003 Make sure that you: • Are logged on with appropriate permissions • Ensure that Setup can contact a domain controller running Windows 2000 SP3 or later or Windows Server 2003 family • Upgrade all front-end servers in an administrative group first • Disable any unnecessary services after Setup completes • Upgrade all Active Directory Connectors to the version provided with Exchange Server 2003 • Remove MMIS Exchange Event Sink • Remove Instant Messaging, Chat, Key Management Service, and MS Mail or Lotus cc:Mail connectors • Upgrade third-party applications to support Exchange 2003

  32. Demonstration: How to Upgrade from Exchange 2000 Server to Exchange Server 2003 Your instructor will show a presentation that demonstrates how to upgrade from Exchange 2000 Server to Exchange Server 2003

  33. Read the scenarios Determine possible solutions Discuss your solutions with the class 1 2 3 Discussion: Installing and Upgrading to Exchange Server 2003

More Related