1 / 10

Detailed Scan Analysis of Olivine Sample at 2200 hrs

This report provides a comprehensive analysis of the scan conducted on an Olivine sample (Det. 135679) at 2200 hrs on June 10, 2011. Initially, the Y slits were closed completely before the beam returned. The sample spot was adjusted, and slit values were set to zero for accurate measurement. Subsequent scans were performed at 3:38 am and 4:12 am, capturing data on Olivine's characteristics while maintaining a room temperature. Results indicate consistent readings with a sample weight of 60 tons. This analysis is crucial for further research on olivine properties.

chelsi
Télécharger la présentation

Detailed Scan Analysis of Olivine Sample at 2200 hrs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Position at start

  2. Before x scan

  3. 1550 hrs right after first pretty good x scan

  4. Just before rotation Just after +/- 6 mm X1 and X2

  5. Y slits just closed completely; about to set value to zero…

  6. Right after beam came back, 2200 hrs After moving spot to sample (set slit Y’s to 0 right after)

  7. Olivine det 135679 get signal (3:38am 6/10 2011)

  8. Olivine (Scan No10) 4:12 am 6/10

  9. Olivine, Det 1,9,5 close to each, 4:57 6/10, 60tons, room Tem

More Related