1 / 1

BatteryBox Tutorial

Creating the Standoffs (feet on the bottom of the box). They are created by extruding a sketch drawn on a sketch plane at an offset from the Top Plane. The Draft Angle option is also used. See dialog box to the left.

chun
Télécharger la présentation

BatteryBox Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Creating the Standoffs (feet on the bottom of the box). They are created by extruding a sketch drawn on a sketch plane at an offset from the Top Plane. The Draft Angle option is also used. See dialog box to the left. Create a reference plane (Features/Reference Geometry/Plane), at an offset distance of 10.5mm from the Top Plane. You need to select the Reverse Direction check box in the Plane Property Manager. Select the newly created plane and sketch a 1mm diameter circle on it with the correct distances from the sides of the battery box. Extrude the sketch using the Up To Next option with an Outward Draft angle of 10 degrees. Add a .25mm radius fillet to the bottom of the standoff. Suggestions for the pattern. You can create one and try to Linear Pattern them. Or you the Mirroring Tool. If these work out for you, great, I found that I had to use a different technique…. When your part is correct. Record the time in your engineering bellworks folder and report it to the instructor. Good Luck!

More Related