1 / 14

Geometry Terminology (day 2)

Geometry Terminology (day 2). Objective: SWBAT identify basic geometric terminology (1.2) This means chapter 1, section 2 from your online textbook. Don’t forget there are also tutorial videos using your online textbook. **hw/hw log/Storybook/collect parent contact forms/workbook p.7

cian
Télécharger la présentation

Geometry Terminology (day 2)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Geometry Terminology (day 2) Objective: SWBAT identify basic geometric terminology (1.2) This means chapter 1, section 2 from your online textbook. Don’t forget there are also tutorial videos using your online textbook. **hw/hw log/Storybook/collect parent contact forms/workbook p.7 Homework (day 2): Worksheet (day 2) Bring in a piece of cardstock and “string” for STORYTIME Quiz: solving equations/radicals/factoring

  2. Chardes • Place terms on cards: Point, line, plane, space, collinear, coplanar, segment, ray , opposite rays, intersection • Have students come up with a movement to display terms. • “Act” out the term until someone figures it out.

  3. “Story Time……” • 3 Undefined Terms: Point, Line and Plane

  4. Geometry Vocabulary • Space- set of all points • Collinear- points on same line • Coplanar- pts on same plane • Segment- part of a line with 2 endpts and all pts in between

  5. Ray- part of a segment with one endpt extended in one direction • Opposite Rays- form a line same endpoint in opposite directions • Intersection-point that 2 geometric figures have in common What is the intersection of two lines? point (Hint: draw a picture) What is the intersection of two planes? Line How many points are on a line? infinite

  6. Class work: • Workbook p. 7 (1-17, 20, 21-22, 32, 34)

  7. How many Planes are there? • Name three points that are collinear. • Are points A, B, C, & D coplanar? Explain. • At what point do and intersect? 1. One 2. A, B and D 3. no 4. D

  8. How any planes are there? • Name three collinear points. • Are points G, A, B, & F coplanar? Explain • At what point do and intersect? 1. Four 2. D, G, B 3. no 4. no intersection

  9. Activity • Each student gets two cards • Label one Q and one R. • Hold the two card together and place a slit halfway through both cards. • Hold cards so that the slits matchup and slide them together. (Tape cards together) • Where the cards meet models a line. Draw the line and label two points C and D on the line.

  10. Activity Cont. • Draw point F on your model so that it lies in Q but not R. Can F lie on line DC? • Draw point G so that is lies in R but not Q. Can G lie on line DC? • If point H lies in both Q and R where would it lie? Draw it on your model. • Draw a sketch of your model on your paper. Label each thing appropriately.

  11. Homework questions 1-28 (Day 2)

More Related