1 / 16

Exponential Modulation

Exponential Modulation. Analog and Digital Communications Autumn 2005-2006. Exponential Modulation. Modulation in which information signal is encoded in carrier frequency or phase Amplitude of the transmitted signal is constant This modulation is robust to channel gain variations

cleave
Télécharger la présentation

Exponential Modulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Exponential Modulation Analog and Digital Communications Autumn 2005-2006 CS477: Analog and Digital Communications

  2. Exponential Modulation • Modulation in which information signal is encoded in carrier frequency or phase • Amplitude of the transmitted signal is constant • This modulation is robust to channel gain variations • The modulation is non-linear • Bandwidth of the transmitted signals depends upon the amplitude of the information signal CS477: Analog and Digital Communications

  3. Exponential Modulation Transmitted/Modulated signal: Total instantaneous angle: To obtain angle or exponential modulation: Make instantaneous phase dependent on the information signal CS477: Analog and Digital Communications

  4. Instantaneous Frequency Instantaneous frequency: For constant phase signals: For signals with time varying phase: CS477: Analog and Digital Communications

  5. is called phase deviation Phase Modulation (PM) Make phase proportional to the information signal: Instantaneous frequency is dependent on the derivative of the information signal CS477: Analog and Digital Communications

  6. is called frequency deviation Frequency Modulation (FM) Make instantaneous frequency dependent on the information signal What is the transmitted signal? CS477: Analog and Digital Communications

  7. PM Modulator Input FM Output PM to FM and Vice Versa (For FM) (For PM) CS477: Analog and Digital Communications

  8. Peak and Average Powers • Peak power is: • Average power is: • Peak to average power ratio is 2 • Compare with DSB and AM • Low peak to average power ratio is good for circuit designers CS477: Analog and Digital Communications

  9. AM, FM, and PM Comparison CS477: Analog and Digital Communications

  10. Spectral Analysis of FM • Exponential modulation is non-linear • Bandwidth of the transmitted signals depends upon the amplitude of the information signal • Hard to analyze with Fourier transforms • Narrowband approximation makes analysis a little easier  NBFM and NBPM • For narrowband approximation to hold: CS477: Analog and Digital Communications

  11. NBFM and NBPM Consider the bandpass transmitted signal: For narrowband approximation: CS477: Analog and Digital Communications

  12. NBFM and NBPM Thus, for NBFM and NBPM: CS477: Analog and Digital Communications

  13. Tone Modulation Thus, for NBFM and NBPM: CS477: Analog and Digital Communications

  14. Tone Modulation with NB CS477: Analog and Digital Communications

  15. Tone Modulation with NB CS477: Analog and Digital Communications

  16. NOTE: and are periodic Tone Modulation with WB CS477: Analog and Digital Communications

More Related