1 / 10

Innovative Excellence

Innovative Excellence. 171 Bush Telegraph Street Northlands Business Park Northriding Johannesburg PO Box 2291 Rivonia, 2128. Web Page: www.maXem.co.za E-Mail: info@maXem.co.za Tel: +27 (0)11 462-5114 Fax: +27 (0)11 462-8740. Long Hole Stoping Comparison. Comparison between

clio
Télécharger la présentation

Innovative Excellence

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Innovative Excellence 171 Bush Telegraph Street Northlands Business Park Northriding Johannesburg PO Box 2291 Rivonia, 2128 Web Page: www.maXem.co.za E-Mail: info@maXem.co.za Tel: +27 (0)11 462-5114 Fax: +27 (0)11 462-8740

  2. Long Hole Stoping Comparison Comparison between Small hole Tophammer - 45mm and Large Specific Drilling is required in order to maintain Powder Factor Small Hole ITH – 60mm Ability to Drill a single row of holes in center of stope is assumed Basic assumptions made for method comparison Powder Factor used is the same as that of conventional Powder Factor used is the same between compared methods Stope Span is the same between compared methods

  3. Plan Section of Raise & Stope

  4. Dip Section of Raise & Stope

  5. Blast Pattern – TophammerDrill Hole Diameter = 45mm Disadvantage High Specific Drilling = High Cost Small Stand-Offs to Contacts Complex Rig setup and moving Advantage Do not require defined contacts

  6. Blast Pattern – TophammerDrill Hole Diameter = 45mm Disadvantage High Specific Drilling (small holes) = High Cost Small Stand-Offs to Contacts Complex Rig setup and moving Advantage Less Drilling than 5 hole dice require medium defined contacts

  7. Blast Pattern – ITHDrill Hole Diameter = 60mm Disadvantage Require defined contacts Advantage Low Specific Drilling = Low Cost Large Stand-Offs to Contacts Easy Drill Rig setup and moving

  8. Long Hole Stoping ComparisonCommon Results

  9. Long Hole Stoping ComparisonCommon Results – not recalculated from previous input

  10. Long Hole Stoping Comparison 6m Ledging 20m Full Span Stoping

More Related