1 / 16

CLIC_DDS Vasim Khan 14.01.10

CLIC_DDS Vasim Khan 14.01.10. What I have done. DDS2 : 9 single cell (half-iris) simulations (with fine mesh) Mesh optimisation for dipole simulations Efficiency calculations: Non-interleaved and 8-fold interleaved structure

colin-gates
Télécharger la présentation

CLIC_DDS Vasim Khan 14.01.10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CLIC_DDS Vasim Khan 14.01.10

  2. What I have done • DDS2 : 9 single cell (half-iris) simulations (with fine mesh) • Mesh optimisation for dipole simulations • Efficiency calculations: Non-interleaved and 8-fold interleaved structure • Three identical cell structure simulation and phase calculation (Floquet theorem) • Design: Three identical cells with tapered manifold • Full str. design : 24 detuned cells (full iris) with tapered manifold + beam pipe • Eigen and driven mode simulations : Full structure • Thesis : Three chapters done!

  3. Typical single cell – half iris No fillet/chamfer yet ? Mesh : Monopole Vol + Sur + Sur. Appr. + additional 2 mm + 1mm + 2μm + 0.5 mm + 0.5 mm

  4. Dipole mode mesh optimisation Mode # 1 Surface approximation only 2 mm + 1mm + 2μm Mode # 3 Surface approximation only Mode # 2 Surface approximation only 2 mm + 1mm + 2μm 2 mm + 1mm + 2μm

  5. Dipole mode mesh optimisation 20 μm 10 μm 15 μm 5 μm 2 μm

  6. DDS2 : 9 cell results

  7. DDS2 : 9 cell results

  8. DDS2 : 1 of 8 interleaved structures- to be built

  9. DDS2 : RF properties Constraint 251 Constraint 41 Single structure <8 structures> <8 structures> Single structure

  10. 3 identical cell structure

  11. 3 detuned cell structure Cell # 13 Cell # 24 Cell # 1 Cell # 1 Cell # 13 Cell # 24

  12. Manifold radius is const. in a given cell Manifold radius: Erf distribution 3 detuned cell structure with erf-distribution in manifold Manifold radius: Linear tapering 40 μm taper in manifold radius in each cell 3 detuned cell structure with tapered manifold

  13. S11 Monopole 3 cell structure Manifold radius: Erf distribution S22 S12 & S21 S11 Dipole S22 S12 & S21

  14. S11 Monopole 3 cell structure Manifold radius: Linear tapering S22 S12 & S21 S11 Dipole S22 S12 & S21

  15. Full structure 24 detuned cells with tapered manifold and beam pipes S11 S22 S12 & S21 S11 Dipole Monopole S22 S12 & S21

  16. I need to understand • How to use Master-Slave B.C. in asymmetric planes i.e. full iris single cell (beam pipe) in order to understand the effect of 40 micron taper in a manifold • Full str. simulation ...I have problems in getting all 24 modes • Phase calculation for a detuned structure....Floquet’s theorem is not applicable here • Tuning 24 cell detuned structure with beam pipes & 2 matching cells • S-parameters and driven modal simulations

More Related