1 / 13

SAFETY STANDARDS FINAL JEOPARDY

SAFETY STANDARDS FINAL JEOPARDY. Add up your team’s bonus points & add to your current point total Every team with 0 or negative points starts with 3 points (ex. Team #1 has –3 pt., now has 3 pts)

colorado-morse
Télécharger la présentation

SAFETY STANDARDS FINAL JEOPARDY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SAFETY STANDARDS FINAL JEOPARDY Add up your team’s bonus points & add to your current point total Every team with 0 or negative points starts with 3 points (ex. Team #1 has –3 pt., now has 3 pts) Every team with positive points starts with 2 extra points (ex. Team #12 has 3 pts., now has 5 pts)

  2. GENERAL SAFETY SYSTEMS CRM USES THIS SYSTEM TO ENSURE THAT EMPLOYEES ARE TRAINED & EQUIPPED TO DO THEIR WORK USING SAFE WORK PROCEDURES: WHAT IS THE TASK TRAINING PROGRAM? NAME 2 OF 3 SEGMENTS OF THE TASK TRAINING PROGRAM: WHAT ARE CLASSROOM TRAINING, FIELD TRAINING, AND DOCUMENTATION (TIMECARDS, CHECK-OFF SHEETS & 5000-23 FORMS).

  3. CHANGE MANAGEMENT THE MAIN POINT OF CHANGE MANAGEMENT IS ENSURING THAT THE CHANGE DOES NOT CAUSE INJURY TO PEOPLE OR _________________: WHAT IS DAMAGE PHYSICAL ASSETS? BRINGING A NEW DOZER ON-SITE INITATES THE CHANGE OF MANAGEMENT PROCESS. NAME 3 OF 4 SAFETY STANDARDS THAT MAY REQUIRE SOMETHING DONE TO THE MACHINE BEFORE IT IS PUT INTO THE DIRT: WHAT ARE WORKING @ HEIGHTS, CONFINED SPACE, ISOLATION, & VEHICLES & DRIVING?

  4. CONTRACTOR SAFETY MANAGEMENT KOMATSU IS ON-SITE TO WORK ON 268. NAME THE CONTRACTOR CATEGORY KOMATSU FALLS UNDER: WHAT IS CATEGORY 3? A WORK PERMIT IS REQUIRED FOR KOMATSU IN THIS CASE. NAME 2 OF THE PEOPLE INVOLVED WITH THE REVIEW OF THE PERMIT: WHO IS THE CRM REP & THE CONTRACTOR REP? IF THE WORK EXTENDS BEYOND ONE SHIFT, NAME HOW OFTEN THE PERMIT IS REVIEWED: WHAT IS ONCE PER SHIFT?

  5. ISOLATION A HAUL TRUCK OPERATOR HAS DISCOVERED A SUBSTANTIAL LEAK COMING FROM THE ENGINE AND MUST DO THIS TO PREVENT SOMEONE FROM TAKING THE TRUCK: WHAT IS APPLY A “DO NOT OPERATE” TAG? A “DNO” TAG MUST HAVE THE DATE, NAME OF DESIGNATED I. O., NAMES OF OTHERS WORKING ON PROJECT, AND THIS LAST ITEM ON THE BACK SIDE OF THE TAG: WHAT IS THE REASON FOR WORK OR EXPLANATION OF NATURE OF WORK?

  6. ISOLATION ELVIS HAS LEFT HIS PERSONAL LOCK ON AN ELECTRICAL PANEL AT THE PLANT, HAS LEFT THE BUILDING, & CANNOT BE CONTACTED. NAME THE PERSON WHO MUST BE CONTACTED TO GAIN APPROVAL FOR THE LOCK’S REMOVAL: WHO IS THE MINE MANAGER? JOE WILL DO THIS WHEN YOU GO TO GET YOUR LOCK: WHAT IS SAY THANKS FOR LOCKING OUT BUT REMEMBER TO TAKE YOUR LOCK OFF BEFORE LEAVING?

  7. VEHICLES & DRIVING THIS MUST BE COMPLETED AND DOCUMENTED BEFORE ANY VEHICLE IS OPERATED FOR WORK PURPOSES: WHAT IS A PRE-SHIFT INSPECTION OR VEHICLE REPORT? NAME THE FREQUENCY OF VEHICLES AND DRIVING TRAINING: WHAT IS ONCE A YEAR? AN EMPLOYEE MUST BE OBSERVED BY THIS PERSON TO EVALUATE THEIR DRIVING COMPETENCY: WHO IS THEIR IMMEDIATE SUPERVISOR/MANAGER?

  8. WORKING @ HEIGHTS NAME 2 OF 3 STEPS 2 CRM WORKERS MUST TAKE BEFORE PERFORMING A WELD INSPECTION ON A HAUL TRUCK FROM THE TRUCK FRAME: WHAT ARE ISOLATE THE TRUCK, PERFORM AN INFORMAL RISK ASSESSMENT, & USE FALL PROTECTION OR FALL PREVENTION? A PRE-USE INSPECTION SHOULD BE DONE FOR THESE 3 ELEMENTS OF THE FALL PROTECTION SYSTEM: WHAT ARE HARNESS, SHOCK-ABSORBING LANYARD, & ANCHOR POINT?

  9. WORKING @ HEIGHTS A MECHANIC IS USING A POWER WASHER TO CLEAN A TRACKHOE ENGINE. HE IS STANDING ON THE TRACK WHICH IS LESS THAN 6’ HIGH & IS 2’ WIDE. NAME THE FALL PREVENTION OR FALL PROTECTION PRECAUTIONS HE MUST UTILIZE: WHAT ARE USE A MANLIFT OR SIZZORLIFT, SAFETY HARNESS AND LANYARD, USE A WORK PLATFORM? AN EMPLOYEE IS IN THE SHOP USING A STATIONARY PLATFORM TO PAINT NEW NUMBERS ON A HAUL TRUCK. NAME A PRECAUTION THAT MUST BE TAKEN TO PREVENT INJURY TO OTHERS. WHAT IS BARRICADE THE AREA UNDERNEATH TO WARN OTHERS OF OVERHEAD WORK?

  10. CONFINED SPACE THIS IS POSTED IN PLAIN SIGHT, NEAR THE ENTRY AREA, FOR THE LENGTH OF THE JOB (PLEASE BE SPECIFIC): WHAT IS THE CONFINED SPACE ENTRY PERMIT? NAME 3 DUTIES OF THE ATTENDANT : WHAT ARE REQUIRED BEFORE ENTRY, BE OUTSIDE ENTRANCE, HAVE NO OTHER DUTIES, KEEPS COMMUNICATION OR VISUAL CONTACT WITH ENTRANTS, SIGN ENTRANTS IN AND OUT, BE ABLE TO IMMEDIATLY ACQUIRE RESCUE ASSISTANCE?

  11. CONFINED SPACE NAME THE 3 OF 5 CONDITIONS THAT MUST BE PRESENT FOR AN AREA TO BE CONSIDERED A CONFINED SPACE: WHAT IS A RISK ASSESSMENT HAS DETERMINED IT IS A CONFINED SPACE; IT IS NOTINTENDED PRIMARILY AS A PLACE OF WORK; IT MAY HAVE LIMITED ENTRY/EXIT; IT MAY HAVE A POTENTIALLY HARMFUL ATMOSPHERE, IT MAY HAVE THE POTENTIAL OF ENGULFMENT OR ENTRAPMENT? THE PRE-ENTRY ORIENTATION WITH ALL ENTRANTS INCLUDES REVIEWING THE RISK ASSESSMENT, REVIEWING THE ENTRY PERMIT, DISCUSSION OF KNOWN & POTENTIAL HAZARDS AND ___________: WHAT ARE THE EMERGENCY PROCEDURES OR RESCUE PLAN?

  12. SAFETY STANDARDS FINAL JEOPARDYRules for last question All teams must wager at least 3 points on the last answer Label question sheet with team # and state amount wagered at bottom of sheet Write question and fold paper

  13. GENERAL SAFETY SYSTEMS NEW EMPLOYEES WORK WITH EXPERIENCED EMPLOYEES UNTIL THEY SHOW A HIGH PROFICIENCY IN JOB TASKS AND IN THIS SAFETY ISSUE: WHAT IS HAZARD RECOGNITION OR RISK ASSESSMENT?

More Related