1 / 4

Exercise Lecture 7 Completing Exercise - Lecture 6

Exercise Lecture 7 Completing Exercise - Lecture 6 . Create Your Own Blocks Insert Blocks to Your New Drawing Using Different Hatching Types. Create Your Own Blocks. Create new drawing named (My Blocks), Change drawing units to be metric,

dai
Télécharger la présentation

Exercise Lecture 7 Completing Exercise - Lecture 6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Exercise Lecture 7 Completing Exercise - Lecture 6 Create Your Own Blocks Insert Blocks to Your New Drawing Using Different Hatching Types

  2. Create Your Own Blocks • Create new drawing named (My Blocks), • Change drawing units to be metric, • Draw door & window and create door and window blocks, • Open Design Center and go to Home Designer then createtool palette • Insert the following blocks from these palettes.

  3. Insert Blocks to Your New Drawing • Open your previous (Ground Floor Plan) drawing, • Insert doors and windows blocks from (My Blocks) Drawing, • Alignthem in their suitable places, • Insert bathroom blocks as shown in the following drawing,

  4. Using Different Hatching Types • Create new layer (Hatch), • Use suitable hatching types for Bath and Balcony spaces as shown in the following drawing.

More Related