1 / 22

The BRASS Project

The BRASS Project. University of North Dakota Matthew Voigt Nathan Ambler Ron Fevig John Nordlie Tim Young Nirmal Patel (University of North Florida) Baike Xi Joshua Peterson David Delene Len Hillhouse Telang Kaiwalya Gökhan Sever December 16 th , 2008.

dai
Télécharger la présentation

The BRASS Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The BRASS Project University of North Dakota Matthew Voigt Nathan Ambler Ron Fevig John Nordlie Tim Young Nirmal Patel (University of North Florida) Baike Xi Joshua Peterson David Delene Len Hillhouse Telang Kaiwalya Gökhan Sever December 16th, 2008 Balloon and Rocket Atmospheric Sampling and Sensing Critical Design Review

  2. Mission Overview The Objective • The altitude of the mesosphere is from 50 km to approximately 90 km. The mesosphere is a poorly studied layer of the atmosphere since it is too high for an aircraft or balloon and too low for an orbiting spacecraft. • To measure concentrations of H2, Ch4, CO (reducing)*, O3, O2, N2O (oxidizing)*, in the mesosphere in nearly real-time using nanocrystalline oxide semiconductor sensors arrays and also simultaneously obtain information on the magnetic field strength. • Furthermore two additional payloads are being integrated • To measure the number of particulates in the air, using a particle counter • To inspect the ‘hardiness’ of cellular material by using lettuce sprouts * Currently we are addressing which of these six will be measured.

  3. Mission Overview To Prove • Capability of in-situ atmospheric measurements on sounding rockets which has already been proven successful on high altitude balloons. To Discover • The relative amounts of H2, Ch4, CO (reducing)*, O3, O2, N2O (oxidizing)*, gasses in the mesosphere. Related Research • Nanocrystalline solid state gas sensor arrays developed and fabricated by Dr. Nirmal Patel at University of North Florida (U.S. patent pending) had three balloon flights so far: • 2007 in Florida (telemetry issues) • 2008 in North Dakota (telemetry issues) • 2008 HASP – successful flight and data obtained

  4. Mission Overview • The theory of the payload • Nanocrystalline Oxide semiconductors such as Indium-tin oxide solid state sensor arrays with different types of catalytic layers and stimulators for the detection of specific gases. Sensors will be calibrated in the lab. Also, a selectivity algorithm will be determined. • Change in the electrical resistance with respect to change in the concentration of gas gives the electrical signal for the sensors. • Resistance values will be recorded using a flash memory. After data recovery and analysis, the concentration of different gases will be determined using the calibrated plots and selectivity algorithm. • Some of the particulate will be collected on the adhesive surface of tape. The morphology of particulate will be examined using scanning electron microscope (SEM), while chemical composition will be determined using energy dispersive analysis of x-rays (EDAX). • The bio payload will undergo decompression, exposing the payload to vacuum.

  5. Mission Overview • The theory of the data • The data can assist to the models of our current atmosphere. • The surface morphology of sensors before launch and after recovery will be examined using SEM, while EDAX will be used to check the chemical composition of the surface of sensors. • The particle counter uses a laser which interacts with the particulates that pass by, scattering the light downward onto the optical sensor, measuring the particulate.

  6. Scientific Requirements Matrix

  7. Payload Requirements Matrix

  8. Payload Function Diagram 1 • Electrical subsystem • Batteries • Remove Before Flights • G-Switches • PIC micro controller • Data logging • Analog switch • Sensors subsystem • Nanocrystalline Oxide semiconductors • Vacuum vessels • Solenoid subsystem • Particle counter subsystem • Optical particle counter 3 2 4

  9. Payload Mechanical Design The assembly was created using ProE Wildfire 4.0. Payload assembly shown in the next couple of slides comprises of different materials. Green: PCB, Sky Blue (dull): Subassembly of different materials, Navy blue (dark): Steel components, Metallic gray: Al 6061, Transparent gray: Polycarbonate plates. Payload height and interfacing are illustrated and explained on the following figures. All the structural components will be manufactured in-house.

  10. Interfacing details with canister bottom bulk head and the sharing customer Canister and payload assembly

  11. Payload height for half canister = 4.7”

  12. Payload exploded view

  13. Main Electrical Schematics View

  14. Analog and Serial Interfacing Schematics

  15. Sensor Interfacing Schematics

  16. Main Controller Circuitry

  17. Power Interface Schematics

  18. Subsystems Overview Subsystem power and temperature ranges • Solenoid Valves • Power requirements 24 VDC • Thermal ranges- -0.4°C – 50°C • Particle Counter • Power requirements 11-15 VDC at 450 mA • Thermal ranges 0° to 50° C • TC72-2.8MUA Temperature Sensor • Power requirements 5 V at 250 μA • Thermal ranges -55° to 125° C (+/- 3° C) • Honeywell HEL-705-T-0-12-00 Temperature Sensor • -200 °C to 260 °C temperature range • Intersema MS5534B Pressure Sensor • Power Requirements: 2.2-3.6 V at 1 mA • –40° C to 125° C

  19. Parts List PartsCompany Model Flow selection Solenoid valve Bio-Chem valve Inc. 080T81232 Tubing (PTFE) Bio-Chem Fluidics 008716-080-20 Omnilok- Type P Fitting Bio-Chem Fluidics 008NF16-YC5 P Type ferrule- 008FT16 Temperature Sensor HoneyWell HEL-705-T-0-12-00 Pressure Sensor Intersema MS5534B RS232 Connection Maxim-IC MAX232A EEPROM Microchip Inc. 25LC1024 A/D Voltage Conditioner Analog Devices AD621 Multiplexer Maxim-IC MAX305 PIC Microcontroller Microchip Inc. PIC18F4520 Voltage Regulator Microchip Inc. MCP1541

  20. BRASS Team Management

  21. Test Plans Testing Plans- Mechanical Computer simulations for SCC – Monday January 21st Mass Moment of Inertia Testing – Monday April 7th Vibration table testing – looking into UND’s abilities – Monday April 14th Pressure/Vacuum, Testing – Monday April 21st Temperature Testing – Monday April 28th Day in the Life Testing Event – Monday May 12th Testing Plans – Electrical Prototype Friday February 18th Working Circuit Tuesday March 3rd Manufacture Printed Circuit Tuesday March 17th Populated Circuit board Tuesday March 31st Potential Points of Failure Particle counter being vacuum ready Computer can lock up and stop running (soft errors)

  22. Issues and Concerns • Issues and concerns Possibility of flight Plumbing volume in rocket Argon gas venting Battery chemistry Coordination with canister partner Apogee detection

More Related