SlideServe
Menu
Préférences
© SlideServe · v2026

WAN Technologies Chapter 14

dai avatar
12 diapositives · 452 Views · Oct 23, 2014

Switched Networks. Virtual Circuit Switch. Packet Switch. Circuit Switch. WAN Technologies Chapter 14. Switched Networks. Switched Networks. Circuit Switched Network. Circuit from A to M could be dynamic Circuit from A to M could be permanent

WAN Technologies Chapter 14 - slide 1
01 / 12WAN Technologies Chapter 14
1 / 17

Télécharger la présentation

WAN Technologies Chapter 14
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Switched Networks Virtual Circuit Switch Packet Switch Circuit Switch WAN TechnologiesChapter 14 Switched Networks

  2. Switched Networks

  3. Circuit Switched Network • Circuit from A to M could be dynamic • Circuit from A to M could be permanent • Once set up, looks like a Point-to-Point circuit

  4. Switched Virtual Circuits • A form of switched circuits • May be dynamic or permanent • For any session data path is fixed • Two very popular Switched Virtual Circuit technologies: • Frame Relay • Asynchronous Transfer Mode (ATM) • These are Data Link technologies

  5. Frame Relay • High speed wide area network service • Designed to accept and deliver frames • Frames up to 8k bytes • Actual data transported over traditional telephony circuits (T1, T3) • Often used to interconnect LANs over wide geographical areas

  6. Frame Relay

  7. Frame Relay Virtual Circuit Identifier (VCI) In Frame Relay, VCI is called Data Link Connection Identifier (DLCI)

  8. Asynchronous Transfer Mode (ATM) • Designed by the Telecommunications Industry • Designed to support all existing and future telecommunications services • Voice, high speed data, video • Connection oriented to ensure predictable delivery – quality of service • Designed to support all forms of networking • Designed to include a LAN architecture • Defines different levels of service – (QoS) • CBR – Continuous Bit Rate • VBR – Variable Bit Rate • ABR – Available Bit Rate • UBR – Unspecified Bit Rate

  9. ATM • Basic data unit is fixed frame called a cell • A cell carries 48 bytes of data plus 5 bytes of identification • A composite circuit between 2 ATM switches delivers a fixed rate of cells • Any virtual circuit is made up of a certain number of equally spaced cells per second. • Ex. A voice circuit (64Kbps) would be 166 equally spaced cells • A T1 would be 2020 equally spaced cells

  10. ATM CELL

  11. ATM • ATM was intended to be the universal communications architecture • Why isn’t it dominant today? • Cost – end user equipment is expensive • Cell Overhead – 10 per cent • Complexity of Quality of Service (QoS) • Overtaken but enhancements to Ethernet • Gigabit Ethernet and beyond • MultiProtocol Label Switching (MPLS)

  12. Switched Virtual Networks • These architectures present the view of a point to point circuit to the end client • Thus, various WAN protocols can be run over then • Point-to-Point Protocol (PPP) • HDLC • At upper layers, any protocol stack can also be used, including the Internet Protocol