1 / 7

MERIT Beam Collimator Design

MERIT Beam Collimator Design. Nicholas Olesen 9 August 2006. Contents. Collimator Role Requirement Specifications Proposed Design Additional Information. Collimator Role. Beam of ~30 x 10 12 protons per pulse, integrated power of ~140kW Align the proton beam with the mercury target

davina
Télécharger la présentation

MERIT Beam Collimator Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MERIT Beam Collimator Design Nicholas Olesen 9 August 2006

  2. Contents • Collimator Role • Requirement Specifications • Proposed Design • Additional Information

  3. Collimator Role • Beam of ~30 x 1012 protons per pulse, integrated power of ~140kW • Align the proton beam with the mercury target • Prevent proton beam from hitting and damaging experiment equipment

  4. Requirement Specifications • Nominal position at beam height of 120cm above concrete floor • Located 2m upstream of magnet – must be non-magnetic material • Length of 1m • Collimator block area of at least 150mm x 150mm

  5. Proposed Design • All requirement specs are met • Collimator block area of 160mm x 160mm • Hole radius of 20mm • Lateral movement (x and y axes) of +30mm, longitudinal movement (z axis) of +55mm; manually adjustable • Uses CERN standard parts wherever possible

  6. Additional Information • Target dimensions confirmed • Collimator insert • Needs to be exchangeable (e.g. for different sized aperture) • Material is tungsten • Need drawings of CERN standard parts for alignment • Calculations for energy deposited by beam

More Related