1 / 17

PARÁMETROS DE CORTE

PARÁMETROS DE CORTE . Fresado y torneado. Planeado . Fresado en escuadras profundas o superficiales. Fresado en escuadras profundas o superficiales. Torneado. Velocidad de corte. D = Diámetro a tornear(mm) n = rev /min del Husillo del torno. Velocidad de arranque de viruta(cm 3 /min).

deion
Télécharger la présentation

PARÁMETROS DE CORTE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PARÁMETROS DE CORTE Fresado y torneado

  2. Planeado

  3. Fresado en escuadrasprofundas o superficiales

  4. Fresado en escuadrasprofundas o superficiales

  5. Torneado

  6. Velocidad de corte D = Diámetro a tornear(mm) n = rev/min del Husillo del torno

  7. Velocidad de arranque de viruta(cm3/min) ap = Profundidad de corte(mm) fn = Avance (mm/rev)

  8. Fresado

  9. Velocidad de corte(m/min)

  10. Avance por vuelta(mm/rev) Vf = Avance de la mesa

  11. Avance de la mesa(mm/min) fz = Avance por diente de la fresa Zc = Número de dientes de la fresa

  12. Velocidad de arranque de viruta(cm3/min) ap = Profundidad de corte(mm) ae = Profundidad de corte radial(mm)

More Related