1 / 10

PC 232 Serial Ports

PC 232 Serial Ports. Ports Connectors at back of PC Plus related internal electronics to send/receive PC 232 Serial Port Follows EIA/TIA 232 standards. PC 232 Serial Ports: 9-Pin and 25-Pin Ports. 9 pins or 25 pins Parallel ports have 25 holes. Pins. 9-pin Serial Port.

demetrius-price
Télécharger la présentation

PC 232 Serial Ports

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PC 232 Serial Ports • Ports • Connectors at back of PC • Plus related internal electronics to send/receive • PC 232 Serial Port • Follows EIA/TIA 232 standards

  2. PC 232 Serial Ports: 9-Pin and 25-Pin Ports • 9 pins or 25 pins • Parallel ports have 25 holes Pins 9-pin Serial Port 25-pin Serial Port 25-pin Parallel Port Holes

  3. 232 Serial Ports: Send on One Pin Each Way • 9-Pin 232 Serial Ports • PC sends on Pin 3 (modem receives) • PC receives on Pin 2 (modem sends) • Pin 5 is a signal ground defining zero volts PC Modem

  4. 232 Serial Ports: Send on One Pin Each Way • 9-Pin 232 Serial Ports • Other pins are control signals to tell other side when it may transmit • Or tell PC what modem is hearing on the line (ringing, modem carrier signal) PC Modem

  5. Serial and Parallel Transmission • Serial: one wire, one bit per clock cycle* • Second (ground) wire needed for circuit is not shown 1 0 One Bit in Clock Cycle One One Bit in Clock Cycle Two *For simplicity, we assume binary transmission (2 possible states/clock cycle)

  6. Serial and Parallel Transmission • Parallel • N bits per second on N wires • Parallel is faster than serial 1 1 1 1 0 0 Eight Bits In Clock Cycle One Eight Bits In Clock Cycle Two 1 1 1 1 0 0 0 0 0 0

  7. Serial and Parallel Transmission • Parallel Transmission • N bits per second on N wires • N=8 in this example, but this is not the only possibility • N can also be 4, 16, 32, etc. 1 1 1 1 0 0 1 1 1 1 0 0 0 0 0 0

  8. Serial and Parallel Transmission • Parallel Transmission is Only for Short Distances • Usually up to about 2 meters (6 feet) • Wire propagation speeds vary • Over long distances, bits from different clock cycles overlap 1 1 1 1 0 0 1 1 1 1 0 0 0 0 0 0

  9. PC 232 Serial Ports: Voltages • For sending data • One is -3 to -15 volts • Zero is +3 to +15 volts • Binary (only two possible states) +15v 0 0 1 -15v

  10. PC 232 Serial Ports • PC 232 serial ports are binary because there are only two states (voltage levels) • PC 232 serial ports are serial because data is sent on only one wire at a time • These are separate things • One does not require the other

More Related