1 / 11

TLC58581 application user guide

TLC58581 application user guide. PSIL-LED. TLC59581(2) Application User Guide. 2. Hardware connection Test tool of LED Screen Advanced login Screen config Performance setting TLC59581 extended attributes. Hardware connection. Sending Card MCTRL 300. Receiving Card MRV300. 3.

dholly
Télécharger la présentation

TLC58581 application user guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TLC58581 application user guide PSIL-LED

  2. TLC59581(2) Application User Guide 2 Hardware connection Test tool of LED Screen Advanced login Screen config Performance setting TLC59581extended attributes

  3. Hardware connection Sending Card MCTRL 300 Receiving Card MRV300 3

  4. Hardware connection 5V DC Ethernet Cable USB Cable to PC DVI Cable to PC 4

  5. Hardware connection Pin Comments TLC59581 LED Pannel Receiving Card 5

  6. Test tool of LED Screen • Plug-inTool  Test Tool Test Tool of LED Screen 6

  7. Advanced login • User Advanced Login input the password 666  Advanced user login interface 7

  8. Screen Config • Advanced user login interface Screen Config Config Screen/Load Config File  Screen Config 8

  9. Performance setting • Screen Config Scan Board(Receiving Board) Performance Setting You can load the config data to Scan Card, if you have a ##.rcfg file. You can read back the config data from Scan Card first and modify some setting Scan Type can be set here 9

  10. TLC59581extended attributes • Screen Config  Scan Card(Receiving Card) Performance Setting More Setting TLC59581Extended Attributes • After finished the config Apply Come back to Scan Card Send to HWSave • After send to HW, the config data will be fixed in the flash of the Scan Card (The config data can be reloaded automatically in next time power on) 10

  11. Thank you 11

More Related