1 / 10

Influence of Solvent on Selective Deposition of Tungsten Oxide Nanostructures via AACVD

Influence of Solvent on Selective Deposition of Tungsten Oxide Nanostructures via AACVD. Chris Blackman. Background. The intrinsic properties of nanomaterials promise advances in a wide range of fields Vapour synthesis of nanomaterials – AACVD Increased atom efficiency

diamond
Télécharger la présentation

Influence of Solvent on Selective Deposition of Tungsten Oxide Nanostructures via AACVD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Influence of Solvent on Selective Deposition of Tungsten Oxide Nanostructures via AACVD Chris Blackman

  2. Background • The intrinsic properties of nanomaterials promise advances in a wide range of fields • Vapour synthesis of nanomaterials – AACVD • Increased atom efficiency • Reduced waste production • Compatible with device manufacture • Scalable • Synthesis often requires high temperatures • Device fabrication issues • Precursor design • Other factors?

  3. Synthesis • Precursor [W(OPh)6] • Solvent • Acetone • Methanol • Toluene • Substrate 400 °C – 600 °C • Carrier (N2) Flow 200 cm3/min W.B. Cross et al, Chem. Mater., 2003, 2786

  4. Toluene Solution Results Y. Liu, M. Liu, Adv. Funct. Mater., 2005, 15

  5. Acetone Solution Results

  6. Factors Affecting Nanostructure Morphology • Influence of evaporation time of aerosol droplets • ‘Normal’ view is complete evaporation of droplet • Incomplete evaporation can lead to formation of solid shell at droplet surface • Less volatile toluene has lower probability of forming solid shell

  7. Factors Affecting Nanostructure Morphology • Influence of reactant diffusion • Principally dependent on precursor flux

  8. Methanol-containing Solution Results • Addition of methanol causes dramatic reduction in temperature required for nanostructure formation • Methanol is known to decompose via a radical mechanism at temperatures as low as 220 °C • Formation of more reactive intermediate, i.e. methanol is not simply a ‘carrier’ solvent • Formation of particles (homogeneous reaction) at increased temperatures indicates a different chemical species (intermediate) may be involved compared to toluene or acetone

  9. Conclusions • The use of different ‘carrier’ solvents influences the nanostructure morphology obtained • Differences between acetone and toluene may be related to: • Rate of droplet evaporation • Rate of reactant diffusion • Difference found with methanol may be related to chemical interaction between solvent and precursor

  10. Acknowledgements • Dr Stella Vargas • Mr Savio Moniz • Dr PolonaUmek (Jozef Stefan Institute, Slovenia)

More Related