1 / 9

ISO7140FCC Startup Waveforms

This document presents the startup waveform analysis of a circuit under two different conditions, focusing on the voltage outputs relative to defined input conditions. For Condition 1, a 5Hz triangle wave (0V to 5V) is supplied to VCC1 while VCC2 remains at a steady 5V and VIN at 0V. For Condition 2, the same triangle waveform is applied to VCC1, alongside a fixed 5V at VCC2 and a VIN of 5V. Oscilloscope channel readings display VOUT and VCC1, showing the impact of input variations on output performance.

dior
Télécharger la présentation

ISO7140FCC Startup Waveforms

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ISO7140FCC Startup Waveforms 14 January 2014

  2. Condition 1 • VCC1 = 5Hz Triangle, 0V to 5V • VCC2 = 5V • VIN = 0V • Scope Channel 2 = VOUT • Scope Channel 4 = VCC1

  3. Wide Zoom

  4. VCC1 Rising

  5. VCC1 Falling

  6. Condition 2 • VCC1 = 5Hz Triangle, 0V to 5V • VCC2 = 5V • VIN = 5V • Scope Channel 2 = VOUT • Scope Channel 4 = VCC1

  7. Wide Zoom

  8. VCC1 Rising

  9. VCC1 Falling

More Related