html5-img
1 / 33

Lecture II: SE 201

Lecture II: SE 201. Introduction to Automation/Control Systems. Objectives. Define the role of an automation/control engineer Define the fields of related knowledge to automation and control Define the scope of the career of an automation and control engineer Grasp definitions and concepts

donaldlandry
Télécharger la présentation

Lecture II: SE 201

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture II: SE 201 Introduction to Automation/Control Systems

  2. Objectives • Define the role of an automation/control engineer • Define the fields of related knowledge to automation and control • Define the scope of the career of an automation and control engineer • Grasp definitions and concepts • Examples

  3. Automation/Control Systems Engineers • Automation/Control systems engineers are concerned with understanding and controlling segments of their environment (Systems) to provide useful economic products for society

  4. Effective automation/control require: • Understanding • Modeling • Designing • Testing • Implementation • Monitoring

  5. Automation/Control engineering is based on the foundations of: • Feedback theory • Linear system analysis • Control Engineering Integrates • Network theory • Communication theory • Reliability and maintenance theory • Safety theory

  6. Scope of Automation/control engineering • Not limited • Aeronautical • Chemical • Mechanical • Environmental • Civil • Electrical • Biomedical • …..

  7. Definition 1: • A control system is an interconnection of components forming a system configuration that will provide a desired system response. • Analysis in general involves: • Linear system Theory : Assumes Cause-effect relationship for the components of a system.

  8. Effect Cause Process Output Input Usual Representation • Every component (or process) can be represented by a block • SISO: Single input Single output

  9. Process Actuator Output Desired Output response Usual Representation • SIMO: Single input multi-output • MISO: • MIMO:

  10. Process Actuator Output Desired Output response Open-Loop Control System • An open-loop control system utilizes an actuating device to control the process directly without using feedback.

  11. Open loop system

  12. Comparison Actuator Process Desired Output Output Measurement Close-Loop Feedback Control • A close-loop system uses a measurement of the output and feedback of this signal to compare it with the desired output (reference or command)

  13. History • Watt’s Fly ball governor 1769.

  14. Examples

  15. Plant Automation

  16. Automated material Handling and storage system AGV: Automatic guided vehicle

  17. Assembly lines

  18. Petrochemical Ras Tanura Jubail Bahrain Saudi Arabia Arabian Gulf Yanbu Rabiq Jeddah Abqaiq Riyadh Red Sea Arabian Sea

  19. SIMPLIFIED PROCESS FLOW • OFFGAS • GAS PLANTS • NGL • JUAYMAH • RAS • TANURA COMPRESSION FRACTIONATION GAS • CRUDE • RAS TANURA • JUAYMAH • YANBU • JUBAIL • BAPCO OIL & GAS SPHEROIDS STABILIZATION SHIPPING

  20. Abqaiq Plants Distributed Control System

  21. Aerospace

  22. Aerospace and Communication

  23. Communication II

  24. Communication

  25. Agriculture

  26. Agriculture II

More Related