1 / 1

Calibrations of the ladders ?

Calibrations of the ladders ?. Before and after being assembled on a ladder, the modules are tested and characterized in terms of noise, dead channel s and pedestal offset. No systematic channel by channel calibration (for gain for example) is needed. Low voltage settings

dorjan
Télécharger la présentation

Calibrations of the ladders ?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Calibrations of the ladders ? • Before and after being assembled on a ladder, the modules are tested and characterized in terms of noise, dead channels and pedestal offset. • No systematic channel by channel calibration (for gain for example) is needed. • Low voltage settings • Hold signal (derived for the trigger) synchronization with the FFE shaping time • Pedestal runs needed to assert the SSD working parameters (need the STAR DAQ for a couple of weeks)

More Related