1 / 7

Multi-Piece Rim Matching for Safe Assembly

Identify DOT markings on rim components to ensure compatibility, avoid mismatched pieces, and evacuate zones if needed, following OSHA guidelines. Contact supervisor and tire specialist for hazardous situations.

ednacarroll
Télécharger la présentation

Multi-Piece Rim Matching for Safe Assembly

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Multi-Piece Rim Assembly Component Matching

  2. DOT Identifications • Found on weather side of each component • Stamped into components • Visually inspect each component to identify markings • Ensure component compatibility using markings found on components & OSHA wall chart

  3. Example of Markings I.D. Stampings

  4. OSHA Wall Chart

  5. MismatchedComponents Identified • Evacuate trajectory zones - do not handle assembly • Immediately report to supervisor

  6. Trajectory Zones

  7. Supervisor Actions • Ensure trajectory zones are evacuated • Barricade effected areas • Install temporary barriers • Contact tire specialist to mitigate & remove hazard

More Related