1 / 13

Propylene Glycol Production Facility

Propylene Glycol Production Facility. INTEGRATED PROCESS DESIGN (44323) Chemical Engineering University of Valladolid Group assignment 2011/12. Upper boundary: S M + S D = 1. S D. Range of available values of S M and S D. S M > 85%. S M + S D > 95%. Reactor performance .

eileen
Télécharger la présentation

Propylene Glycol Production Facility

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Propylene Glycol Production Facility INTEGRATED PROCESS DESIGN (44323) Chemical Engineering University of Valladolid Group assignment 2011/12

  2. Upper boundary: SM + SD = 1 SD Range of available values of SM and SD • SM > 85% • SM + SD > 95%

  3. Reactor performance • Maximum Selectivity • Multiple in series reactions: • Flow Pattern • Components analysis: • Concentration • Selectivity: • Inerts: reduce kinetics and do not change selectivity → No • Temperature • Exothermic reactions: Adiabatic or cooled? • Pressure • To maintain liquid state. depending on temperature.

  4. “Simulate reaction kinetics in an isothermal (125ºC) plug flow reactor. at 20 bar constant pressure. with a residence time of 5 seconds. Feed stream 100 kmol/h of PO. and H2O/PO molar ratio = 15.” PhthalicAnhydride_01.apw

  5. Sensitivity analysis: Selectivity versus Residence Time (Length) • Constant production: 120,000 t/y MPG Vary: PO Mole flow • Constant temperature: 125ºC • Constant H2=/PO: 15.0 Vary: H2O Mole flow

  6. Sensitivity analysis: Selectivity versus Temperature • Constant production: 120,000 t/y MPG Vary: PO Mole flow • Constant conversion: 96.7% Vary: Length • Constant H2=/PO: 15.0 Vary: H2O Mole flow

More Related