elinor
Uploaded by
7 SLIDES
291 VUES
70LIKES

Beam Bending Lab Introduction

DESCRIPTION

ENGR 1181. Beam Bending Lab Introduction. Engineering Education innovation Center. Beam Bending Lab Concepts. 1. Stress, Strain, Young's modulus 2. Moment of Inertia 3. Force and deflection of a cantilever beam 4. Dial caliper and d ial indicator measurements. ENGR 1181.

1 / 7

Télécharger la présentation

Beam Bending Lab Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ENGR 1181 Beam Bending Lab Introduction Engineering Education innovation Center

  2. Beam Bending Lab Concepts 1. Stress, Strain, Young's modulus 2. Moment of Inertia 3. Force and deflection of a cantilever beam 4. Dial caliper and dial indicator measurements • ENGR 1181

  3. Beam Bending Lab Apparatus • ENGR 1181

  4. Beam Bending Lab Tasks • 1. Working in a team of two, assemble the Beam Bending apparatus • 2. Measure Deflection versus Force for: • Aluminum Rectangular Beam • Copper Rectangular Beam • Copper Square Beam • Unknown Rectangular Beam • ENGR 1181

  5. Min and Max Readings • Deflection will be calculated by averaging measured minimum and maximum deflection values.

  6. Typical Data and Results • ENGR 1181

More Related