1 / 6

T-Slot chip clearing test

T-Slot chip clearing test. T-Slot is made out of plastic, designed in CATIA and sent to a rapid prototyping 3D printer. . T-Slot fits the track profile without contact (ideally). . At low feed rates, the chips are gathered and pushed out. They have a tendency to bunch up and bind, however. .

emele
Télécharger la présentation

T-Slot chip clearing test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. T-Slot chip clearing test

  2. T-Slot is made out of plastic, designed in CATIA and sent to a rapid prototyping 3D printer.

  3. T-Slot fits the track profile without contact (ideally).

  4. At low feed rates, the chips are gathered and pushed out. They have a tendency to bunch up and bind, however.

  5. This binding induces stress on the T-Slot, which has the propensity to fail. Actually, this T-Slot failed because Steve pressed the rapid auto-feed button in the wrong axis, rendering the piece useless  .

  6. Conclusions • The T-Slot should be designed to withstand the forces of chips binding up. • Make it out of aluminum or brass? • (Nothing harder than track material) • With stronger materials [than the plastic], faster feed rates could be achieved.

More Related