1 / 26

Energy Transfer By Heat, Work, and Mass

Energy Transfer By Heat, Work, and Mass. Cengel & Boles, Chapter 3. Energy Transfer. Energy transfer to/from closed systems Heat ( Q ) Work ( W ) Energy transfer to/from open systems (control volumes) Heat ( Q ) Work ( W ) Mass flow. Heat.

emera
Télécharger la présentation

Energy Transfer By Heat, Work, and Mass

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Energy Transfer By Heat, Work, and Mass Cengel & Boles, Chapter 3 ME 152

  2. Energy Transfer • Energy transfer to/from closed systems • Heat (Q) • Work (W) • Energy transfer to/from open systems (control volumes) • Heat (Q) • Work (W) • Mass flow ME 152

  3. Heat • Heat (Q) is the transfer of energy due to a temperature difference • a system w/o heat transfer is an adiabatic system • SI units: kJ • Heat rate, , (kJ/s or kW) • Heat per unit mass, q = Q/m • Sign convention: • Q > 0: heat transferred to system from surroundings • Q < 0: heat transferred from system to surroundings ME 152

  4. Heat Transfer Modes • Conduction • transfer of heat through a material due to random molecular or atomic motion; most important in solids • Radiation • transfer of heat due to emission of electromagnetic waves, usually between surfaces separated by a gas or vacuum • Convection • transfer of heat between a solid surface and fluid due to combined mechanisms of i) fluid conduction at surface; ii) fluid flow within boundary layer ME 152

  5. Conduction Heat Transfer • Fourier’s law of conduction: ME 152

  6. Convection Heat Transfer • Newton’s law of “cooling”, or convection: ME 152

  7. Radiation Heat Transfer • Stefan-Boltzmann law of radiation (between a small surface A of emissivity e and large surroundings): ME 152

  8. Work • Work (W) is the energy transfer associated with a force acting through a distance: • Work rate or power • Work per unit mass, w = W/m • Sign convention • W > 0: work done by system on surroundings • W < 0: work done on system by surroundings ME 152

  9. Types of Work • Moving boundary (compression/expansion) work • Shaft work • Spring work • Electrical work • Other forms; work associated with: • Acceleration • Gravity • Polarization • Magnetization • Solid deformation • Liquid film stretching ME 152

  10. Moving Boundary Work • Associated with a volume change of a fluid system (aka compression-expansion work) ME 152

  11. Moving Boundary Work, cont. • Expansion: dV > 0, Wb > 0 • Compression: dV < 0, Wb < 0 • Work processes on P-V diagram: ME 152

  12. Moving Boundary Work, cont. • Special cases: 1) if V = constant, Wb = 0 2) if P = constant, Wb = P(V2-V1) 3) if PVn= constant (known as a polytropic process), (see pp. 135-136 for derivation) ME 152

  13. Shaft Work • Associated with a rotating shaft ME 152

  14. Spring Work • Associated with the extension or compression of a spring; if spring is linear, then force obeys Hooke’s law, ME 152

  15. Electrical Work • Associated with the motion of electrons due to an electromotive force ME 152

  16. Work and Heat • Both are energy transfers • Both are path-dependent functions • P and V are properties, because • Q and W are path functions, because ME 152

  17. Conservation of Mass • “Mass can neither be created nor destroyed” • mass and energy can be converted to each other according to Einstein’s E=mc2, but this effect is negligible except for nuclear reactions) • For closed systems, this principle imposes m = constant since mass cannot cross the system boundary • For control volumes, the mass entering and leaving the system may be different and must be accounted for ME 152

  18. Mass and VolumeFlow Rates • Mass flow rate: fluid mass conveyed per unit time [kg/s] where Vn = velocity normal to area [m/s]  = fluid density [kg/m3] A = cross-sectional area [m2] ME 152

  19. Mass and VolumeFlow Rates, cont. • For most pipe flows,  = constant and the average velocity (V) is used: • Volume flow rate is given by ME 152

  20. Conservation of Mass Principle - Control Volume • Net mass transfer during a process is equal to the net change in total mass of the system during that process where i = inlet, e = exit, 1 = initial state, 2 = final state • in rate form: • In fluid mechanics, this is often referred to as the continuity equation ME 152

  21. Steady-Flow Processes • Steady-flow or steady-state – a condition where all fluid and flow properties, heat rates, and work rates do not change with time. • mathematically: • applied to mass balance: ME 152

  22. Steady-Flow Processes, cont. • Conservation of mass during a steady-flow process: • If control volume is single-stream (i.e., one inlet, one exit), then ME 152

  23. Incompressible Flow • If  = constant, then the mass flow is considered incompressible • for steady-flow: • for single-stream, steady-flow: ME 152

  24. Total Energy of a Flowing Fluid • A flowing fluid contains internal, kinetic, and potential energies: • Fluid entering or leaving a control volume has an additional form of energy known as flow energy, which represents the work required to “push” the fluid across a boundary: ME 152

  25. Total Energy of a Flowing Fluid, cont. • The total energy of a flowing fluid (on a unit-mass basis, ) becomes • Using the definition of enthalpy (h), ME 152

  26. Energy Transport by Mass • Amount of energy transport: • Rate of energy transport: ME 152

More Related