installing levolor aluminum blinds

1. How to install Levolor aluminum blinds Levolor is a famous custom blinds and shades manufacturer. If you are thinking to build a home or just renovating you may have to get Aluminum blinds in Chicago for home improvements. The blind installation may be a bit intimidating but it is quite easy and simple. The importance of Levolor aluminum blinds: Levolor Window coverings include cellular shades, vertical blinds, and roller shades. These window blinds are available in an assortment of materials such as fabric, aluminum, vinyl, and wood. They are available in custom sizes and these blinds fit into your windows perfectly. Most type of Levolor Aluminum blinds in Chicago comes in slats that can be cut to the correct width and installed. Let’s take a good look at those installation steps including, Step 1: First, raise the Levolor blinds out from their brackets with hands and lay them on a level surface. Step 2: Now tie the lift cords in a loose knot and pry off the plugs in the underside of the bottom metal bar or rail with a flat head screwdriver. Undo the knots in at ends of strings and pull them out through the holes in each slat. Grab the slats and slide them out with a strong ladder to hold them.

2. Step 3: Pile the slats one by one on top of the other and align the ends. Wrap a large rubber band around the slats and masking tape so they do not splinter when installed. Mark the place where you want to cut the Levolor Aluminum blinds in Chicago to make them fit in windows measurements with a pen. Step 4: Remove the metal piece on the ends of the headrail. The headrail is a long metal piece that holds blinds. Now use a measuring tape to determine where to cut the headrail so that it will match the width of blinds and place on the location. Repeat this from top to bottom rail and push metal piece back onto the ends. Step 5: Mark the line indicates the width of the window on the valance that covers the headrail with a pen so you know where to trim it. Cut the line carefully using a hacksaw.

3. Step 6: Push the slats back into string ladders gently and make sure they are facing the same direction. Thread the string back through holes in slats beginning at the top of the Levolor Aluminum blinds in Chicago. Step 7: Run the string into the opening and in the bottom rail and tie it with a double knot. Rehang the blinds and check if they operated correctly on your windows.